Specifications; Frequency Response - HP AR Operating And Servicing Manual

)
FREQUENCY RESPONSE:
GAIN:
SINUSOIDAL OUTPUT:
PULSE OUTPUT:
INPUT IMPEDANCE:
OUTPUT IMPEDANCE:
NOISE FIGURE:
DELAY CHARACTERISTICS:
RISE TIME:
00019-2
SPECIFICATIONS
High FriO!uency - closely matches Gaussian curve when operating
into a 20 -ohm resistive load. 3 db point is 120 me.
Low Frequency - off approximately 3 db at 20 kc when operating
into a matched load. Off approximately 3 db at 3 kc when operating
into an open circuit (Le., CRT plates).
With
~
4lOB VTVM -
whenusedwith~
46A-95DAdapter, response
±
1 db, 200 kc
to
200 me.
Nominally 20db into 200 ohm load. Gain control has range of 6db.
Five amplifiers may be cascaded.
Approximately 8 volts peak open circuit, less than 5% distortion.
Positive Pulse Input:
+8 V open circuit: +3.2 V into rated load
Negati ve Pulse Input:
-20 V open circuit: -8 V into rated load
200 ohms
300 ohms
Less than 10 db
Approximately 0.014 lisec.
Nominally 0.003
Ii
sec (10% to 90% amplitude). No appreciable
overshoot.
115/230 volts
±
10%, 50/1000 cps, SO watts
)
POWER SUPPLY:
DIMENSIONS:
(Rack Mount)
lit
~
16
REAR
4 - - - 1 9 - - _
Ita
)
WEIGHT:
ACCESSORIES AVAILABLE:
Net 12 lbs. Shipping weight 18 Ibs.
~46A-16A
Patch Cord; 200 ohms, 2 feet long
~
46A-16B Patch Cord; 200 ohms, 6 feet long
~
46A-95A Panel Jack; for 200-ohm cables, low capacitance
~
46A-95B Cable Plug; for 200-ohm systems
~
812-52 Cable; 200 ohm cable in length to specification
~
46A-95C SO-ohm Adapter; Type N to
~
460, SO ohm termination
~
46A-95D Adapter;
~
410B VTVM to
~
460, no termination
~
46A-95E Connector Sleeve; Joins two 46A-95B Cable Plugs
~
46A-95F Adapter; For connecting to 5XP CRT
~
46A-95G Adapter; Connect
~
460 to Tektronic 511 Oscilloscope
~
46A-95H Adapter; Type N to t/iiJ 460, 200 ohm termination
~
46A-95J Adapter; Type N to
~
460, no termination
~
46A-95K Adapter;
~
410 VTVM to
~
460, 200 ohm termination
~
460B-95A Adapter; For connecting
to~
Model 150A Oscilloscope
plates.