D-Link DWL-G122 User Manual page 41

Section 5 - Troubleshooting
2. The computer does not recognize the DWL-G122 Wireless USB Adapter.
Make sure that the DWL-G122 Wireless USB Adapter is properly seated in the computer's USB port.
If Windows does not detect the hardware upon insertion of the adapter, make sure to completely remove drivers that
were previously loaded.
3. The computer with the DWL-G122 installed is unable to connect to the wireless network and/or the
Internet.
• Check that the LED indicators for the broadband modem are indicating normal activity. If not, there may
be a problem with the broadband connection.
• Check that the LED indicators on the wireless router are functioning properly. If not, check that the AC
power and Ethernet cables are irmly connected.
• Check that the IP Address, subnet mask, gateway, and DNS settings are correctly entered for the
network
• In Infrastructure mode, make sure the same Service Set Identiier (SSID) is speciied on the settings
for the wireless clients and access points. The SSID factory default setting for D-Link products is default.
(Double-click on the WLAN icon in the taskbar. The Link Info screen will display the SSID setting.)
D-Link DWL-G122 User Manual 41