D-Link DFL-1000 Quick Install Manual page 6

1. Enter the command.
set system status restart
You can also cycle the power on the DFL-1000 by unplugging it and then
plugging it back in.
If these measures do not work, you can restore the factory default
settings. From the web-based manager:
1. Go to System > Status.
2. Click Reset to default and click OK.
The DFL-1000 is returned to the configuration that it had when you first switched it
on.
From the CLI:
1. Enter the command.
set system status reset
The DFL-1000 is returned to the configuration that it had when you first switched it
on.