Dump (D Command); Memory Set (M Command) - Sharp MZ-700 Basic Manual

69
3.3 DUMP CD Command}
*
D <heading address[ < final address> J>
Displays the memory contents. When the final address is omitted, 128 bytes from the
heading address are displayed. When the heading address is omitted, 128 bytes from
the subsequent address are displayed. Dumping is by the following format.
: HHHH=HH'-JHH'-JHH HH HH HH HH
HH I ABCDE. G.
t
~--------------~v---------------~ ~
Heading address 8-byte hexadecimal data 8-byte character data
If the memory content is changed, move the cursor to the data to be changed, make
the correction, and then input ICRI.
Note:
The final 8-byte characters are displayed by data ASCII code, and the control
code is indicated by a " ... (period). The display is stopped only by the
IBREAKI
key
by
I SHIFT I
+
IBREAKI
there is a return to
a~aiting
a command.
3.4 MEMORY SET CM Command}
*
IM [heading addressJ
Rewrites the memory content. When the heading address is omitted, rewrite is from
the current pointer. To get out of this mode, press
ISHIFTI
+
IBREAKI.
Because the address and data are displayed and the cursor superimposes over the
data, designate the data by the editing format and press ICRI. The designated data
and address will be added and continue to the next line.