3.
Pivot the monitor from landscape to portrait orientation viewing to adapt to your application.
a.
Adjust the monitor to full-height position and tilt the monitor back to full-tilt position (1).
b.
Pivot the monitor clockwise 90° from landscape to portrait orientation (2).
CAUTION:
right corner of the monitor panel will come in contact with the base and potentially cause
damage to the monitor.
Figure 2-8
NOTE:
Assistant software included on the software and documentation disc. The position of the OSD
menu can also be rotated to portrait mode. To rotate the OSD menu, access the OSD menu by
pressing the
Rotate OSD.
8
Chapter 2 Setting up the monitor
If the monitor is not in full-height and full-tilt position when pivoting, the bottom
Pivoting the monitor
To view information on the screen in portrait mode, you can install the HP Display
button on the front panel, select OSD Control from the menu, and then select
Menu