Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Fujitsu B19W-5 ECO
Summary of Contents for Fujitsu B19W-5 ECO
- Page 1 Display B19W-5 ECO Operating Manual English...
- Page 2 ... any technical questions or problems? Please contact: • our Hotline/Help Desk (please refer to the enclosed Help Desk list or look up the contact details on our website at: "http://ts.fujitsu.com/support/" • your sales partner • your sales office The latest information about our products, useful tips, updates etc. is available on our website: "http://ts.fujitsu.com/support/"...
- Page 4 Copyright © Fujitsu Technology Solutions 2009 2009/06 Published by Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße 8 80807 München, Germany Contact http://ts.fujitsu.com/support All rights reserved, including intellectual property rights. Technical data subject to modifi cations and delivery subject to availability. Any liability that the data and illustrations are complete, actual or correct is excluded.
-
Page 5: Table Of Contents
FUJITSU B19W-5 ECO Operating Manual Your LCD screen... Important notes Getting started Operation Troubleshooting Notes regarding the DIN EN ISO 13406-2 standard Technical specification... - Page 6 VESA, DDC and DPMS are registered trademarks of the Video Electronics Standards Association. Copyright © Fujitsu Technology Solutions GmbH 2009 All rights reserved, including rights of translation, reproduction by printing, copying or similar methods, in part or in whole. Offenders will be liable for damages.
- Page 7 Contents Contents Your LCD screen............... . Target group .
- Page 8 Contents A26361-K1333-Z220-1-7619, edition 1...
-
Page 9: Your Lcd Screen
Your LCD screen... Your LCD screen... has a whole range of useful features and functions, e.g.: • TFT display (Thin Film Transistor; active matrix) minimal space requirements thanks to slim casing • • optimum ergonomic characteristics (totally distortion-free, excellent picture definition and colour purity right into the corners) •... -
Page 10: Further Information
"Safety information" • cross-references to an external source, e.g. a web address: For more information, go to "http://ts.fujitsu.com" • Names of CDs, DVDs and titles or designations of other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety" Manual indicates a key on the keyboard, e.g:... -
Page 11: Important Notes
Important notes Important notes Importantnotes Notes In this chapter you will find information regarding safety which it is essential to take note of when working with your device. Safety instructions This device complies with the relevant safety regulations for data processing equipment, including electronic office machines for use in an office environment. -
Page 12: Power Cable
Important notes • The device must only be operated in landscape mode (0°) and portrait mode (90°). The control buttons are located in the middle of the bottom of the monitor in landscape mode (0°) and at the left-hand side of the monitor in portrait mode (90°). •... -
Page 13: Ce Marking
These savings could also prevent the emission of 20 million tons of carbon dioxide into the atmosphere - equivalent to the discharge from 5 million cars. As an Energy Star Partner, Fujitsu Technology Solutions GmbH has determined that this product meets the Energy Star guidelines for energy efficiency. -
Page 14: Disposal And Recycling
Fujitsu America Inc. Protection Administration 1250E. Arques Avenue Executive, Yuan, R.O.C. Sunnyvale, CA 94085, U.S.A. "http://recycle.epa.gov.tw" Contact: Bernd Henning Phone No.: (408) 329-6737 Fax No.: (408) 746-8299 Information on this subject is also available on the Internet at "http://ts.fujitsu.com/recycling". A26361-K1333-Z220-1-7619, edition 1... -
Page 15: Getting Started
Getting started Getting started Unpacking and checking the delivery The display surface of the device is sensitive to pressure and scratches. Always hold the device by the casing! The complete device package includes: • one monitor • one data cable (D-SUB) •... -
Page 16: Setting Up An Ergonomic Video Workstation
Getting started Setting up an ergonomic video workstation ► Do not position the video workstation opposite a window (1). ► Position the monitor outside the reach of a light source (1). ► Position the keyboard where it is easiest to reach (1). A26361-K1333-Z220-1-7619, edition 1... -
Page 17: Adjusting The Height
Getting started ► Position the monitor so that the eye distance to the screen (1) is around 50 cm. 50 cm ► Position the monitor for optimum viewing (1). The monitor should under no circumstances fall outside the permissible viewing space (2). Depending on the situation, it may be advisable to use a swivel arm or wall bracket (VESA FPMPMI), which are available from specialist dealers. -
Page 18: Adjusting Portrait Format
Getting started Adjusting portrait format The monitor can be rotated from horizontal format (landscape mode) into vertical format (portrait mode). ► Grasp the monitor with both hands on the right and left edge of the casing, move it into the highest position and turn it clockwise until it is in the portrait position. For you to be able to display the screen contents in portrait mode, your graphics card will also need to support this function or you will need to use special software. -
Page 19: Connecting The Device
Getting started Connecting the device Please observe the safety information in "Important notes", Page CE conformance and optimum picture quality are guaranteed only if you use the data cables supplied. ► Switch off the monitor and the computer. ► Disconnect the power plug from the computer. Connecting cables to the monitor The data cables supplied have two 15-pin D-SUB connectors or two 24-pin DVI connectors for connection to the monitor and to the computer. -
Page 20: Connecting Cables To The Computer
Getting started 1 = Power connector 3 = DVI-D socket (DVI) 2 = AUDIO-IN socket 4 = D-SUB socket (VGA) ► Connect one of the connectors of the data cable to the D-SUB socket or DVI-D socket of the monitor and secure the plug-in connection by tightening the safety screws. The monitor automatically detects the input when only one signal source is connected. -
Page 21: Operation
Operation Operation Switching the device on and off 1 = Power supply indicator 2 = ON/OFF switch ► Switch the device on using the ON/OFF switch. Press the buttons from the bottom upwards. Only switch on the computer after you have switched on the monitor. The colour of the LED indicator changes as follows: LED indicator Status... -
Page 22: Notes On Power Management
Operation Notes on power management If your computer is equipped with power management (power-saving mode), the monitor can fully support this function. Here the monitor does not distinguish between the individual energy-saving modes of the computer (standby mode, suspend mode and OFF mode), as it is capable of immediately switching into the mode with the highest energy-saving effect. -
Page 23: Changing The Monitor Settings
Operation Changing the monitor settings When putting the monitor into operation for the first time, the screen display should be optimally adapted to the display adapter used. Changing the monitor settings with the buttons of the control panel The buttons of the control panel have two functions. With the OSD menu not activated, you can make the following settings directly: EXIT / AUTO SELECT/ MENU... -
Page 24: Changing The Monitor Settings Using The Osd Menu
Operation Activate/deactivate ECO operating mode The power consumption of the device can be decreased by reducing the brightness of the picture. ► Press the Forwards / ECO button to switch the ECO operating mode on or off. The message Action was executed appears. If the ECO operating mode is activated, the following OSD settings are changed: Colour 6500K... - Page 25 Operation The OSD menu is available in various languages. The English menu names are used in the following description (default setting). You can select another language using the OSD Language function in the OSD Setup menu. ► Press the button to SELECT/MENU activate the OSD menu.
-
Page 26: Osd Menu Functions
Operation If you wish to change other settings, select the corresponding function from the OSD main menu. All possible adjustments of the main menu are described below. OSD menu functions The OSD menu for analogue monitor operation is described below. During digital operation some functions are not available, they are not needed because of the digital transmission technology being used. -
Page 27: Adjusting The Screen Size And Position
Operation Adjusting the screen size and position Calling the Image adjust setting window H-position * Adjustment of the picture horizontal position With this function you can move the picture to the left or to the right. V-position * Adjusting the picture vertical position With this function you can move the picture up or down. - Page 28 Operation Adjusting the display of the OSD menu Calling the OSD Setup adjustment window Language Selecting the language for the OSD menu With this function you choose between English (default setting), French, German, Italian and Spanish as the language for the OSD menu. OSDH position Setting the horizontal position of the OSD menu With this function you can move the OSD menu to the left or to the right.
-
Page 29: Displaying Information
Operation Displaying information Call the Information setting window With this function the model designation, serial number, resolution, H/V frequency, input signal and polarity of the synchronisation signal are displayed. A26361-K1333-Z220-1-7619, edition 1... -
Page 30: Troubleshooting
Troubleshooting Troubleshooting Should an error occur, first check the following points. If the distortion is still not eliminated, the monitor should, if possible, be checked on another computer. If you are unable to solve the problem, please inform our help desk. Having this problem? Check the following points: No screen display... - Page 31 Troubleshooting Having this problem? Check the following points: Picture disturbances (horizontal lines, picture ► Press the EXIT / AUTO button to perform noise) auto-adjustment of the screen. The screen becomes darker The background lighting has a limited lifetime. If your monitor display should become too dark, the background lighting will have to be replaced.
-
Page 32: Notes Regarding The Din En Iso 13406-2 Standard
Notes regarding the DIN EN ISO 13406-2 standard Notes regarding the DIN EN ISO 13406-2 standard Permanently unlit or lit pixels The standard of production techniques today cannot guarantee an absolutely fault-free screen display. A few isolated constant lit or unlit pixels (picture elements) may be present. The maximum permitted number of pixels faults is stipulated in the international standard ISO 13406-2 (Class II). -
Page 33: Technical Specification
Technical specification Technical specification Condensation is not permitted, neither in the rated range of operation nor in the limit range of operation. B19W-5 ECO Dimensions and weight Visible diagonals 48.3 cm Dot pitch 0.285 mm Image size Width 410 mm... -
Page 34: Vesa-Ddc-Compatible Vga Interface
Technical specification Ambient conditions Environment class 3K2, DIN IEC 721 Rated range of operation 15 °C ..35 °C Humidity 20 % ..85 % Limit range of operation 5 °C ..35 °C Humidity 20 % ..85 % VESA-DDC-compatible VGA interface Your monitor is equipped with a VESA-DDC-compatible VGA interface. -
Page 35: Sub D Port
Technical specification SUB D port Meaning Video input red Video input green Video input blue Ground Ground Video ground red Video ground green Video ground blue +5 V (DDC) Sync. ground Ground DDC Data H. sync V. sync DDC Clock A26361-K1333-Z220-1-7619, edition 1... -
Page 36: Dvi-D Port
Technical specification DVI-D port Meaning TMDS Data2– TMDS Data2+ TMDS Data 2/4 Shield not connected not connected DDC Clock DDC Data Analog Vertical Sync TMDS Data1– TMDS Data1+ TMDS Data 1/3 Shield not connected not connected +5V Power Earth Hot Plug Detect TMDS Data0–...