Programming Your Name Into Display; Using Dial By Name; Wake-Up Call - LG aria130 User Manual

Table of Contents

aria

130 - DIGITAL KEY TELEPHONE SYSTEM USER GUIDE

Wake-up Call

The system automatically sends ring signal to a station which registers a wake-up time. There are two kinds of wake-up call,

one is effective for one-day, the other is effective until canceled.

Button

To register wake-up time,

Press TRANS/PGM button.

Dial 4 1 and 4-digit wake-up time (HHMM) in 24-hour mode.(HH = 00~23, MM = 00~59)

Press HOLD/SAVE button for "one-day" or dial # and HOLD/SAVE button for "until

canceled". (Confirmation tone is heard.)

To cancel wake-up call,

Press TRANS/PGM button and dial 4 2.

Press HOLD/SAVE button. (Confirmation tone is heard.)

Using Dial By Name

Each station and speed dial number can be assigned to a name. When names are programmed, you may select a speed dial

number by the stored name.

Button

Press SPEED button twice.

On the display, you will see the following.

ICM : 1 U_SPD : 2 S_SPD : 3

Select desired type.

1 : Intercom

2 : User (Station Speed Dial)

3 : System (System Speed Dial)

Confirmation tone is heard and you will see the following.

1 : XXXX XXXX XXXXXX

2 : YYYY YYYY YYYYYY

Using Dial By Name

Button

Pressing VOLUME button, the cursor will be moved to the next name. When the cursor

points a name or a dial number to call, press HOLD/SAVE button. Then, the stored

number is dialed.

You may enter characters using the code in "Storing Dial by Name". The LCD will display

the first two names which match your input. (You may delete the last letter of your input by

pressing CALLBK button. And then, the previous matched name is displayed.)

You can see the matched phone number by pressing FLASH button while the name is

displayed (toggle).