Hardware Overview; Leds; Connections - D-Link DAP-2695 User Manual

D-Link DAP-2695 User Manual
1 2
When lit, the access point is operating at 5GHz. This light
1 5GHz
will blink when there is wireless traffic.
When lit, the access point is operating at 2.4GHz. This
2 2.4GHz
light will blink when there is wireless traffic.
Solid light when the Ethernet port is connected to a
power over Ethernet (PoE) port, such as a router or
3 LAN1 (PoE)
switch. The light will blink when there is traffic through
LAN port.
Solid light when the Ethernet port is connected to a
4
LAN2 working port, such as a router or switch. The light will
blink when there is traffic through LAN port.
The light will blink during boot up. Once solid, the access
5 Power
point is ready.

Hardware Overview

LEDs

3 4 5

Connections

1 2 3
Press and hold for six seconds to reset the access point
1 Reset Button
to the factory default settings.
Connect the supplied console cable to configure
2 Console Port
using a command line interface.
3 LAN2 Port Connect to your network with an Ethernet cable.
Connect to a Power over Ethernet (PoE) switch or
4 LAN1 (PoE) Port
router.
5 Power Receptor Connect the supplied power adapter.
4 5
7