Pioneer djm-2000nxs dj mixer operating instructions (68 pages)
Summary of Contents for Pioneer DJM-900SRT
Page 1
DJM-900SRT DJM-900SRT Serato DJ Edition http://pioneerdj.com/support/ The Pioneer DJ support site shown above offers FAQs, information on software and various other types of information and services to allow you to use your product in greater comfort. http://serato.com/ For the latest version of the Serato DJ software, access Serato.com and download the software from there.
Contents Before start With the DJM-900SRT, the four decks (players) provided in the Serato DJ software can be controlled (stereo audio signals can be input/output simultaneously to/ from four sets of inputs and four sets of outputs) and sound can be input/output...
For the latest information on the required operating environment and compatibility as well as “Serato.com”. to acquire the latest operating system, refer to “Software Info” under “DJM-900SRT” on the ! Be careful not to forget the e-mail address and password specified when you Pioneer DJ support site below.
— When Serato DJ is launched the first time, an [BUY/ACTIVATE] icon may be to the Serato DJ software download page. displayed in the license panel, but there is no need for DJM-900SRT users to Proceed to step 9. activate the software or purchase the license.
! Before installing the driver software, terminate all other programs running on your computer. ! For information on the latest version of the driver software, see [Software Info] under [DJM-900SRT] on the Pioneer DJ support site below. http://pioneerdj.com/support/ Installation Procedure Click the [INSTALL DRIVER] button on the Serato DJ software screen.
! This manual consists mainly of explanations of functions of this unit as hardware. For detailed instructions on operating the Serato DJ software, see the Serato DJ soft- ware manual. The Serato DJ software manual can be downloaded from the Pioneer DJ support site below. See [Software Info] under [DJM-900SRT].
Correspondence table of Serato DJ software decks and DJM- 900SRT channels Serato DJ software deck DECK3 DECK1 DECK2 DECK4 DJM-900SRT channel Set the positions of the controls, etc., as shown below. Names of controls, etc. Position Input selector switch MASTER TRIM control...
2 Connect the ground wires for the respective analog players to this unit’s [SIGNAL GND] terminals. 3 Set the CONTROL VINYLs on the analog players. 4 Switch the DJM-900SRT’s input. Switch the [CH2] and [CH3] input selector switches to [USB]. Input selector switch...
[CDJS] at the [Audio] tab in the utility settings. controlling [DECK2] to the [CH3] [CD/LINE] terminals. 2 Load the CONTROL CDs in the DJ players. 3 Switch the DJM-900SRT’s input. Switch the [CH2] and [CH3] input selector switches to [USB]. Input selector switch...
THRU CROSS FADER ON / OFF CROSS FADER ASSIGN PHONES 4 Select [SETUP] on the Serato DJ software’s screen, then select [CUSTOM] at the [Audio] tab in the utility settings. When [CUSTOM] is selected, the DJM-900SRT settings utility is displayed.
Check that the innermost ring is close to a true circle. 1 [crates] panel 2 [Files] panel For details, see the Serato DJ software manual. The Serato DJ software manual can be downloaded from the Pioneer DJ support site below. Loading tracks See [Software Info] under [DJM-900SRT].