Window Blanking
Window blanking is used to conceal user-defined privacy areas that cannot be viewed by an operator. Each camera
supports up to four blanked windows. A blanked area will appear on the screen as a solid gray window.
Video Management
The 5010 and 5011 cameras connect to Cisco Video Surveillance Manager Version 6.3 and later.
Product Specifications
Features and Benefits
Features include the following:
Up to 2.1-megapixel resolution (1920 x 1080)
●
Up to 30 ips at full HD 1080p
●
Optional CS-mount lenses
●
Auto back focus for high precision
●
Easy, quick, one-handed installation
●
H.264 and MJPEG compression
●
Day/night capability
●
Sensitivity down to 0.03 lux
●
Power over Ethernet (IEEE 802.3af Class 3) or 24 VAC
●
Video setup jack and focus button accessible with dome closed
●
Up to two simultaneous video streams
●
Motion detection
●
Table 1 lists product specifications for the Cisco Video Surveillance 5010 and 5011 IP Cameras.
Table 1.
General
Imaging Device
Imager Type
Imager Readout
Maximum Resolution
Signal-to-Noise Ratio
Auto Iris Lens Type
Electronic Shutter Range
Wide Dynamic Range
White Balance Range
Sensitivity
Dome Attenuation
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Product Specifications
1/3-inch (effective)
CMOS
Progressive scan
1920 x 1080
50 dB
DC drive
1~1/100,000 sec
60 dB
2,000 to 10,000K
f/1.2; 2850K; SNR >24 dB
● Color (1x/33 ms): 0.5 lux
● Color SENS (15x/500 ms): 0.12 lux
● Mono (1x/33 ms): 0.25 lux
● Mono SENS (15x/500 ms): 0.03 lux
Clear: Zero light loss
Smoked: f/1.0 light loss
Data Sheet
Page 2 of 6