Table of Contents
Advertisement
Hotel Mode
[Off]
Pin8
[On]
Last Status
[On]
Panel Lock
[Off]
RCU Inhibit
[Off]
Startup Position
[TV]
Startup Channel
[1]
Volume Limit
[63]
Fixed Volume Enable
[Off]
Fixed Volume Level
[20]
Headphone Direct
Volum
[Disabled]
Studio 19HFL2807D/10
Hotel TV Menu settings
Feature to enable or disable the Hotel TV Menu features.
• When enabled the TV will follow configured feature settings
Note:
Access to the Hotel TV Menu is limited by the use of <Help/Menu> on the HTV Setup RC.
Below settings are only active while [Hotel Mode] is On.
Feature to enable or disable the auto SCART feature
• This feature allows a connected SCART device to turn the TV on or off.
Feature to enable or disable the last status feature
• This feature allows the TV to remember the last used configuration and
restores when startup again. Otherwise default settings are used.
Feature to enable or disable the functionality of the side control TV button.
• Select [On] to lock the side control TV button.
• Select [Off] unlock the side control TV button.
Enable or disable the functionality Remote Control.
• Select [On] to block all RC commands
• Select [Off] and all RC commands are enabled.
19HFL2807D/10:
All configured settings will be lost!!
Recovery of TV to control with a RC is only possible after reinstall TV software.
Select startup program/source when TV is switched on via Power On key or Digit keys.
• Auto TV wakes up in last used channel/source.
• TV TV wakes up with the channel specified in Startup Channel field
• SCART / Side AV / HDMI1/ YPbPr / VGA_PC
TV wakes up with the specified external source
Feature to select the channel to be used as Startup Position
Feature to set the maximum volume level.
• Range values 0-63.
Feature to set Volume to a set Fixed Volume
• Volume is fixed to the level set at Fixed Volume Value item
Feature to set the Fixed Volume level.
• Range values 0-63.
Control Head Phone out volume instead of TV speakers.
TV speakers volume are set to Last Status before Hotel Mode is activated
Don't set this feature to <On>
P a g e
| 23
Advertisement
Table of Contents
