Toshiba 23PB200 Series Owner's Manual page 14

Activating the Picture Mode
This TV off ers the choice of personalising the picture
style.
AutoView, Dynamic, Standard, Mild, Movie, Eco
Mode, Game and PC are preset options and aff ect
many features/settings within the TV.
• Use menus: PICTURE and Picture Settings
• Use the item: Picture Mode
Notes:
• If using Eco Mode will be changed the dark screen,
and you will be able to reduce power consumption.
The Backlight mode is not available in the Eco
Mode.
• Game mode is available in external input mode
(other than aerial input). When you select Game
mode, suitable widescreen formats will be selected.
• PC mode is available in RGB/PC input mode or HDMI
input mode.
Activating the picture preferences
You can customise current Picture Mode settings
as desired. For example, while selecting "Dynamic,"
if you change the following items, such as Picture
Settings items, your new setting is saved as
Dynamic-user.
• Use menus: PICTURE and Picture Settings
• Use items: Backlight, Contrast, Brightness,
Colour, Tint, Sharpness and Colour Temprature
Setting the Contrast Booster
Contrast Booster improves the contrast of the
picture.
• Use menus: PICTURE and Picture Settings
• Use the item: Contrast Booster
• Use modes: High, Off , Low and Middle
Using the Cinema Mode
A movie fi lm's picture runs at 24 frames a second,
whereas movie software such as DVD, etc., that you
enjoy watching on TV at home runs at 30 (NTSC)
or 25 (PAL) frames a second. To convert this signal
to reproduce a smooth motion and picture quality,
select the On mode.
Eff ective signal and setup conditions:
• When the Video input mode is selected.
• When the input signal format is 480i, 576i or 1080i
signals.
• Use menus: PICTURE and Picture Settings
• Use the item: Cinema Mode
Note:
When a DVD movie with subtitle is playing back, this
mode may not work correctly.
Adjusting the Colour Temperature
Colour Temperature increases the warmth or
coolness of the picture by setting the red, green or
blue tint.
• Use menus: PICTURE and Picture Settings
• Use items: Colour Temperature, Red Level,
Green Level and Blue Level
• Use modes: Cool, Natural and Warm etc.
Resetting the Picture Settings
• Use menus: PICTURE and Picture Settings
• Use the item: Reset (select Yes and press Q)
Activating the Noise Reduction (NR)
If the receiving signal of MPEG is a mosquito
(grained) noise depending on the compression and
conversion, the picture is weak and the picture is
blurry, the picture may be improved when using this
function.
• Use menus: PICTURE and Noise Reduction
• Use items: Auto Clean, MPEG NR and DNR
• Use modes: Low, Middle, High and Off etc.
Adjusting the Colour Management
You can adjust the picture colour quality by
selecting from 6 base colour adjustments : Red,
Green, Blue, Yellow, Magenta or Cyan.
• Use menus: PICTURE, 3D Colour Management
(On) and Base Colour Adjustment
• Use items: Hue, Saturation and Brightness
Resetting the Base Colour Adjustment
• Use menus: PICTURE, 3D Colour Management
(On) and Base Colour Adjustment
• Use the item: Reset
Using the Active Backlight Control
In order to improve screen visibility, the Active
Backlight Control sets the screen brightness
automatically during dark scenes.
• Use the menu: PICTURE
• Use the item: Active Backlight Control
– 14 –