Agent_Config - HP 5992-3838 User Manual

agent_config

NAME
agent_config -- Access HP Application Discovery Certificate on Managed System
SYNOPSIS
Path: /opt/amgr/bin/agent_config
agent_config -a [-dir config_directory]
agent_config -amx
agent_config -c
agent_config -printAgentTrust
agent_config -r
agent_config -start
agent_config -stop
DESCRIPTION
The agent_config command allows you to interact with an HP Application Discovery agent
to print its certificate or to remove a counterpart CMS certificate, and to check the status of the
agent, to start an AD agent, or to stop an AD agent.
You can use agent_config remotely from the HP SIM graphical user interface or from the
command line on a managed system. You will need root access to use this command.
Options
If no options are specified, the usage string is printed, and the command exits.
The agent_config command recognizes the following options.
-a
-amx
-c
-dir config_directory
-printAgentTrust
-pushWbemAccessList
-r
-start
-stop
Installation
The agent_config command can be installed from a depot available on the HP VSE Managed
Node Software Update Web site. For installation instructions, please visit the VSE Management
Web site at the following URL:
http://docs.hp.com/en/vsemgmt/agents.html
Beginning with VSE Management Software Version A.03.00.00, agent_config is installed on
the CMS when the VSE Management Software is installed.
RETURN VALUES
0 The command completed successfully; no errors were detected.
1 An error occurred and the command did not complete successfully.
3 Unrecognized command parameters are detected.
4 Missing post-install configuration of AD agent is detected.
Copies CMS certificate from standard input to directory
specified by config_directory. First line following this is expected
to be the name of the CMS. Agent certificate is printed to
standard output.
Print agent certificate to standard output.
Check agent state on a managed node.
Destination to which to copy the certificate.
Print the trusted certificate of the HP Application Discovery
agent.
Store HP Application Discovery WBEM provider access list
from standard input.
Remove the target CMS certificate from a managed node.
Start the agent as a daemon on a managed node.
Stop the agent on a managed node.
59