Toshiba 32L1300U User Manual page 25

Connecting a Blu-ray™ / DVD player, satellite receiver with ColorStream® or VCR
ColorStream
simultaneously.
Items needed:
Coaxial cables
v
Standard AV cables
v
If you have a mono VCR, connect L/MONO on the TV to your
VCR's audio out terminal using the white audio cable only.
Standard audio cables
v
Component video cables
v
You can connect the component video cables (plus audio
v
cables) from the DVD player or satellite receiver to the
COLOR STREAM HD terminal in the TV. The COLOR
STREAM HD terminal can be used to display Progressive
(480p, 720p) and Interlaced (480i, 1080i) scan systems.
Please note that 1080p is not supported. Check the User's
Guide of the DVD player in order to determine the best
output signal available.
If your DVD player or satellite receiver does not have
v
component video, connect a standard A/V cable to the
AUDIO/VIDEO terminal. If your DVD player has
HDMI
device to the HDMITM input" on page 26
When you use ColorStream
appropriately.
To view antenna or Cable channels:
Select the ANT/CABLE video input source on the TV.*
To view the DVD player:
Turn on the DVD player. Select the COLORSTREAM HD Video
input source on the TV.*
To view satellite programs using the component video
connections:
Turn on the satellite receiver. Select the COLORSTREAM HD
Video input source on the TV.*
To view the VCR or view and record antenna channels:
Turn on the VCR. Tune the VCR to the channel you want to watch.
Select the VIDEO video input source on the TV.*
To record a TV program while watching a DVD:
Turn on the VCR. Tune the VCR to the channel to record. Select the
COLORSTREAM HD Video input source on the TV* to view the
DVD.
and composite video cables cannot be connected
®
video, see "Connecting an HDMITM or DVI
TM
HDMI
TM
®
Connecting Your TV
HDMI
HD or Video, switch AV input mode
25
TM