Installing The Pmc Bridge Adapter Onto The Board Computer - HP 744 Hardware User Manual

Figure 2-7
4 Remove the copper EMI gasketing from the front panel of the board com-
puter.
5 Install the PMC bridge adapter onto the board computer as shown in Fig-
ure 2-7. There are four screws that secure the front bezel, and four screws
that secure the VME connectors.
PMC Bridge Adapter
with 2 PMC Cards Installed
Front Bezel Screws (4)

Installing the PMC Bridge Adapter onto the Board Computer

PMC Bridge Adapter and Expansion Adapter
Installing Accessories
Connector
Screws (4)
2-17