Power Cords; Energy Star Compliance - HP Pavilion f1503 User Manual

hp pavilion f1503/f1703 LCD Monitor
R e g u l a t o r y I n f o r m a t i o n

Power Cords

The power cord set (flexible cord or wall plug) received with the monitor meets the
requirements for use in the country/region where you purchased the equipment.
If you need to obtain a power cord for a different country/region, you should
purchase a power cord that is approved for use in that country/region.
The power cord must be rated for the product and for the voltage and current marked
on the product electrical ratings label. The voltage and current rating of the cord
should be greater than the voltage and current rating marked on the product. In
addition, the diameter of the wire must be a minimum of 0.75 mm 2 or 18AWG, and
the length of the cord must be between 6 feet (1.8m) and 12 feet (3.6m). If you have
questions about the type of power cord to use, contact your HP authorized service
provider.
A power cord should be routed so that it is not likely to be walked on or pinched by
items placed upon it or against it. Particular attention should be paid to the plug,
electrical outlet, and the point where the cord exits from the product.

Energy Star Compliance

Hewlett-Packard Pavilion PCs and Monitors marked with the ENERGY STAR logo on
®
the packaging box qualify with the U.S. Environmental Protection Agency's ENERGY
STAR guidelines for energy efficiency.
®
Products with the ENERGY STAR label are designed to use less energy, help you save
®
money on utility bills, and help protect the environment.
ENERGY STAR is a registered trademark owned by the U.S. government.
®
52 English