Supported Video Modes - HP P3901 Owner's Manual

When the monitor enters power saving mode, the message No
Signal is displayed for a few seconds before the screen blanks. In
power saving mode the front panel indicator light is amber.
To set these power saving modes, refer to the manual that came with
your computer.

Supported Video Modes

Your monitor comes with the standard modes shown in the table
below. It also supports intermediate video modes. With the
intermediate modes, the displayed image may need to be optimized
using the buttons on the front panel. All modes are non-interlaced.
NOTE Selecting a combination of screen resolution/image refresh rate
higher than 1024 x 768 at 75Hz will effect display performance.
If you select a video mode not supported by your monitor, the
following message will be displayed:
Screen Resolution
640 x 350
640 x 480
720 x 400
800 x 600
1024 x 768
hp pavilion fx50 15" lcd monitor
Us ing Your M o nit o r
Image Refresh
Rate
70Hz
60Hz, 75Hz
70Hz
60Hz, 75Hz
60Hz, 75Hz
X
English19