Associated Equipment; The Back Panel - GE Kalatel DVMRe-4L User Manual

1.6 Associated Equipment

Associated equipment in a typical security system could contain the following items:
•
Two monitors
•
A Keyboard (KB3 or KTD405).
•
Video cameras: Composite video, 1 volt peak-to-peak.
•
Alarm input devices: Pressure sensors, motion detectors, etc.
•
Alarm output devices: Buzzers, Sirens, Flashing Lights, etc.
•
A PC connected via ethernet cable.
For instructions regarding the connection of the associated security equipment in your system, please
consult the instruction manual of the associated equipment.

1.7 The Back Panel

1
1 2 3 4
1. Camera Inputs: BNC connector, looping. Auto Terminating.
2. Composite Monitor-A Output: Composite video output with BNC style connector.
3. Y/C Monitor-A Output: Y/C video output with 4-pin mini-DIN style connector.
4. Alarm I/O: For connecting alarm inputs, and alarm output relays.
5. Power Input: For connecting the power supply.
6. Aux Port: Not Used.
7. RS485 Port 1 Connector: Not Used.
8. 10/100 Ethernet Port: For connecting to remote PC via ethernet network.
9. Composite Monitor-B Output: Composite video output with BNC style connector.
10. Y/C Monitor-B Output: Not Used.
11. RS232 Port 1: For modem connection and external control of the unit.
12. RS485 Port 2 Connector: Not Used.
13. RS232 Port 2: Not Used.
Camera Inputs
There are two BNC jacks for each camera. Either
jack can receive a camera signal. The signal is
looped (directly connected to the other jack), making
the camera signal available to other equipment.
The camera input connectors are Auto Terminating.
0150-0257A
2
SVHS
B B
9
Cable: 75-Ohm Coaxial
Connectors: BNC
Auto Terminating: Yes
Passive Looping: Yes
8
3 4 5
12V DC
RS-232/1
10
Kalatel DVMRe-4L
6 7 8
ETHERNET
AUX
RS-485/1 10/100
RS-485/2 RS-232/2
11 12 13