Page 4
Your lend-X PRO blender has 6 pre-set before using your Kenwood appliance programmes available for all core blending tasks plus Read these instructions carefully and retain for future the flexibility of variable speed and pulse for total reference. control. Each programme has been set to provide the Remove all packaging and any labels.
Page 5
Always ensure that the vents in the filler cap are clear before q every blending operation When fitting the lid to the goblet always ensure that the lid and goblet rim are clean and dry to ensure a good seal and prevent spillage.
Page 6
Only use the appliance for its intended domestic use. Kenwood will not accept any liability if the appliance is subject to improper use, or failure to comply with these instructions.
Page 7
Ensure the cord is fully unwound from the is identified by colour and a replacement may be cord storage device before using the obtained from your Kenwood Authorised Repairer blender. (see Service). The appliance will not work if the blender is If a non-rewireable plug is cut off it must be incorrectly fitted.
Page 8
to use the stir stick hints To blend dry ingredients - cut into pieces, remove the 1. Fit the lid to the goblet and remove the filler cap. DO filler cap, then with the machine running, drop the NOT use the stir stick in the goblet without the lid pieces down one by one.
Page 9
Recommended Usage Chart (Programme Buttons) Programme Button Usage/Food Items Max. Programme Recommended Time Quantity Fine Chop Use for chopping nuts, breadcrumbs and 30 secs similar dry ingredients. Grinding Coffee Beans and Spices. Coffee Beans 200g For best results manually stop the Almonds 200g program when you...
Designed and engineered by Kenwood in the UK. Made in China. Always switch off, unplug and dismantle before cleaning. Empty the goblet before unscrewing it from the blade unit. Don’t immerse the blade unit in water. The goblet can be washed in your dishwasher.
troubleshooting guide Problem Cause Solution The Blender will not operate. No Power/Power On Light not Check blender plugged in. illuminated. Goblet removed from power unit The power unit will not operate until without turning the speed control the speed control is turned to “on” to “O”.