Indicators - Bosch 670 Series Installation And Operation Manual

Video Recorder 670 Series
5.1.2

Indicators

The indicators on the front panel display light or flash to alert of various operating conditions.
Bosch Security Systems
Acknowledge key
– press to acknowledge an alarm event; a red indicator light is located on the key
Camera keys (1-8/16)
– press to see a full-screen display of the video input
– the LED will be illuminated when the camera is recording
– the LED will flash during an alarm on the camera
Quad key
– press to go to quad mode
– in quad mode, press to toggle to full screen
Sequence key
– view cameras in sequence on full-screen or quad displays
Multi-screen key
– press to go to different multi-screen modes
OSD key
– press to view date/time and camera information, or date/time only
Pause key
– press to freeze the picture
Reverse key
– in live mode, press to start reverse playback of recordings for the displayed cameras
– in playback mode, press to start or speed up reverse playback
– in pause mode, press to step back one frame
Play key
– in live mode, press to resume playback from the last selected playback position
– in pause or fast forward/reverse modes, press to resume playback
Fast forward key
– in live mode, press to start playback from one and a half minutes earlier
– in playback mode, press to speed up the forward playback rate
– in reverse playback mode, press to start forward playback
– in pause mode, press to step forward one frame
Stop key
– while in playback mode, press to return to live mode
Power - lights green when the unit is powered
Network - lights green to indicate network activity
Alarm - flashes red when an alarm is detected
Record - lights red when the unit is recording video
Installation and Operation manual
Operating instructions | en
AM18-Q0617 | v2.0 | 2012.03
31