HP 600 User Manual page 65

Display
Install ink
cartridge
Invalid Time
Job Not Assigned
Junk Fax Empty
Junk Fax Full
Load Document
Memory Full
Memory Full
Press OK to
continue
Memory Received
Ink Low. Install
new ink cartridge
Memory Received
Load paper and
press OK
Memory Received
Install ink
cartridge
No answer from
remote fax
No CID Number
Status/Solution
Print cartridge is not installed or improperly installed.
The time you set for fax forwarding is wrong.
You attempted to cancel a scheduled job but no jobs are
scheduled.
You attempted to delete, print or send the Favorites
document when there is no document stored.
You attempted to delete a junk fax number when there is no
junk fax number.
The machine can hold only 20 junk fax numbers.
You must load a document before proceeding.
Memory has become full while receiving a fax. It will not
answer the telephone until memory has been cleared. Print
any faxes stored in memory and, if necessary, clear
scheduled jobs See Reprinting faxes on page 44 and see
Clearing memory on page 45.
Memory has become full while scanning a document. Press
OK to send or copy the scanned pages only. To cancel the
job press Cancel and try again when memory becomes
available, or split the new document into smaller parts. See
Clearing memory on page 45.
The machine has data stored in memory. Replace the print
cartridge with new one in order to print the faxes.
Load paper and press OK. There might be a jam. Clear the
jam as described in Paper jams during printing on
page 51.
There is no print cartridge in the machine. Install a print
cartridge.
The other machine has not answered after all redial attempts
to send a fax.
The machine could not detect the CID (Caller ID) number.
LCD error messages
Care and maintenance 57