HP 1080p User Manual page 25

Connecting high-definition equipment
using component cables
There are two sets of high-definition Component
connectors you can use:
1: Y, Pb, and Pr, and Audio L and R
■
2: Y, Pb, and Pr, and Audio L and R
■
1
Connect component video cables and left-right
audio cables to the Component connectors on the
rear of the TV.
2
Connect the cables to the DVD player.
3
Turn on the DVD player, and start play.
4
Connect power to the TV; see "Connecting power
to the TV" on page 21.
5
Turn on the TV; see "Turning the TV On and Off"
on page 23.
6
Select the input source to view, as well as the
Aspect, and other options; see "Operating the TV"
on page 29.
Connecting standard-definition
equipment by using S-Video or Video
cables
Connect a standard-definition DVD player, VCR, game
console, camcorder, or other AV equipment by using
S-Vid or Video (composite video) connectors. These
connectors do not pass high-definition signals.
!
The S-Vid and Video connectors share the
audio connectors in the set. Do not connect
video cables to both the S-Vid and Video
connectors in a set.
1
Connect an S-Video cable, or a composite video
cable, by using the AV Input connector sets on the
rear of the TV:
1: S-Vid or Video, and Audio L and R
■
2: S-Vid or Video, and Audio L and R
■
S-Vid connection
Video connection
15
Setting Up the TV