HP xw series Setup And Troubleshooting Manual page 17

Table 2-2 Rear panel connector and control description (continued)
Item Symbol
8
9
* Refer to the Service and Technical Reference Guide for your workstation for specific rear panel component information.
The rear panel connectors are labeled with industry-standard icons and colors to assist you in connecting your peripheral
devices.
Additional rear panel components can include those shown in the examples in Figure 2–5. Your
workstation has some combination of these components, depending upon workstation model and
configuration.
Figure 2-5 Additional rear panel component examples
xw4000 Series
Item Description
1 Built-in Self Test (BIST) LED
2 Universal chassis clamp opening
3 Cable lock slot
4 Padlock loop
5 Access panel key
NOTE:
6 PCI expansion slot access openings (each slot opening typically covered with blank filler panel when not use).
ENWW
Description
Parallel connector *
NOTE: Might not be available on all
workstations.
SVGA Monitor Connector
xw6000 Series
Not all workstations models have the key lock.
Item Symbol Description
NOTE:
workstations.
17 DMS–59 high density graphics connector
NOTE:
workstations.
xw8000/xw9000 Series
Front and rear panel components
Might not be available on all
Might not be available on all
13