HP HDX 18 Maintenance And Service Manual page 67

16. If it is necessary to replace the webcam/microphone module, remove the Phillips PM2.0×4.0 screw 1 that
secures the module to the display bezel.
17. Release the webcam/microphone module 2 as far from the display bezel as the webcam/microphone module
cable allows.
18. Disconnect the webcam/microphone module cable 3 from the webcam/microphone module, and remove the
webcam/microphone module. The webcam/microphone module is available using spare part number
499242-001.
19. If it is necessary to replace the display hinge cover, display inverter, or webcam/microphone module cable,
remove the four Phillips PM2.0×4.0 screws 1 that secure the display hinge cover to the display bezel.
20. Remove the display hinge cover 2 from the display bezel. The display hinge cover is available using spare part
number 496875-001.
Removal and replacement procedures 4–34