Kenmore 90111 Use & Care Manual page 19

Sideburner Valve, Sideburner, Sideburner Bezel,
10
Position valve behind fascia and line up holes (A).
Insert (1) of the #8-32x3/8" stainless steel screws, but do not fully tighten.
Slip bezel under inserted screw and position as shown (A).
Line up other hole and insert (1) #8-32x3/8"
Tighten both securely.
Place sideburner into shelf (B). Make sure
(1) wing nut ( C). Under sideburner shelf, install sideburner clip to sideburner tube and valve. Attach
sideburner ignitor wire to electrode as shown (D).
Place grate onto sideburner shelf (E). Press control knob onto sideburner valve stem (F).
Correctly assembled burner-to-valve engagement
#8-32X3/8"
S tainless Steel Screw
Qty. 2
Wing Nut
Qty. 1
Bezel
A
Sideburner Valve
D
Burner Clip
Insert this tip into
hole in bottom of
sideburner tube
Ignitor Wire, Control Knob
stainless steel screw
to insert valve into sideburner tube. Attach sideburner with
Wing Nut
E
Sideburner
Grid
Control Knob
Clip around
sideburner
valve
through bezel and into valve.
Sideburner
C
Sideburner Valve
F
B
466220111 • 19