Wire colours and connection points for interconnecting wires
Never connect the power supply to the speaker wires (No.6 and No.7),
otherwise it will cause damage to the main unit.
Caution
B+ (Yellow)
1
Connect where power is constantly available, regardless of the ignition key's position.
2
ACC (Red)
Connect where the power comes on when the ignition is in the ACC position.
3
Illumination power supply (Orange/White)
Connect to where power comes on when the vehicle light switch is turned on.
Antenna power supply (Blue)
4
Connect to the automatic-antenna control terminal of the vehicle.
Control power supply (Blue/White)
5
Connect to the control terminal for the external amplifier, etc.
6
Front speaker output wires
Connect to the front speakers.
Rear speaker output wires
7
Connect to the rear speakers.
No connection (Pink)
8
Earth (Black)
9
10
Vehicle speed pulse signal wire (Purple/White)
Connect to the vehicle speed pulse signal terminal.
Parking brake signal wire (Red/White)
11
Connect to the parking brake signal terminal.
Reverse signal wire (Green)
12
Connect the reverse signal output of the vehicle to this terminal.
C
Front line-out terminals
Connect to the RCA connector of an external amplifier.
D
Rear line-out terminals
Connect to the RCA connector of an external amplifier.
E
Line-out terminals (Sub-woofer)
This is used for non fader output. It can be used as a sub-woofer terminal if a separate amplifier with
a low bass filter is connected.
Genuine steering remote control terminal
F
Connect to the vehicle steering remote control.
Compatible vehicle models for installation : Vehicles with voltage detection-type steering remote control.
White:
Left +
Grey:
Right +
Green: Left +
Purple: Right +
Ask your dealer for details.
- 7 -
,
,
,
2
3
4
White/Black:
Left -
Grey/Black:
Right -
Green/Black:
Left -
Purple/Black:
Right -
,
, and
5
6
7