Whirlpool Electric Dryer Use And Care Manual page 16

IANCINC ME DRUM UCHT
ie dryer light automatically turns on inside the
yer drum when you open the door. Your dryer's
urn light may be one of two types, as shown.
Fire Hazard
Replace light bulb cover before
operating dryer.
Failure to do so can result in death
or fire.
B change drum light type I:
.
Unplug the dryer or disconnect the electricity
leading to the dryer at the main power supply.
. Open the dryer door. Remove the light bulb
cover from the back
wall of the dryer by
turning the cover
clockwise.
I. Remove the light bulb by turning it
counterclockwise.
. Replace the bulb with a 40-watt appliance
bulb only.
. Replace the light bulb cover and lock in
i. Reconnect power supply.
place by turning
counterclockwise.
To chanpe drum light type
2:
1.
Unplug the dryer or disconnect the electricity
leading to the dryer at the main power supply.
2. Open the dryer door. Remove the light bulb cover
from the back wall of the
dryer by removing the
screw located in the
lower right corner of
the cover.
3. Remove the light bulb by turning it
counterclockwise.
4. Replace the bulb with a lo-watt appliance
bulb only.
5. Replace the light bulb cover.
6.
Reconnect power supply.
16