Wireless Setup - D-Link DIR-505 User Manual

Section 5 - Repeater Mode
Use this section to manually conigure the settings for your DIR-505's wireless connection to your router, or the wireless net-
work you want to extend. After making your changes, click the Save Settings button.
Wireless This will state Repeater Mode when in Repeater Mode. You
Mode:
can click the Site Survey button to look for available wireless
networks to extend. Selecting a wireless network from the
list that appears will automatically ill in the settings below.
Wireless
When you are browsing for available wireless networks, this
Network is the name that will appear in the list (unless Visibility Status
Name:
is set to Invisible, see below). This name is also referred to as
the SSID. For security purposes, it is highly recommended
to change from the default network name.
Channel
Select the appropriate channel width between 20MHz or
Width: Auto 20/40MHz from the drop-down menu.
Security Select None, WEP, or WPA-Personal. For security purposes,
Mode:
it is highly recommended that you set this to WPA-Personal.
Wi-Fi
Wi-Fi Protected Setup, or WCN, allows you to conigure the
Protected basic settings of the DIR-505 through Windows. To enable
Setup:
this feature, check the Enable checkbox.
D-Link DIR-505 User Manual

Wireless Setup

100