Related Manuals for Kenwood DNX7280BT
Summary of Contents for Kenwood DNX7280BT
- Page 1 DNX7280BT DNX5280BT DNX4280BT DNX5580BT GPS NAVIGATION SYSTEM Quick Start Guide © 2010 Kenwood Corporation All Rights Reserved. B59-2048-00_00 (E/Q/ER)
-
Page 2: Table Of Contents
Other Features _____________________ 16 explanations of the operations. For this How To Play Music reason, they may be different from the actual panels. How To Play Movie/Picture • In this manual, each model name is abbreviated as follows. How To Listen To The Radio DNX7280BT: How To Make A Phone Call DNX5280BT and DNX5580BT: DNX4280BT: Installation Procedure If above icons are showed, read the article applicable to the unit you use. Before Installation __________________ 23 • In operation procedures, bracket shape... -
Page 3: Precautions
DNX7280BT/DNX5280BT/DNX4280BT/DNX5580BT Lens fogging recautions When you turn on the car heater in cold weather, dew or condensation may form on 2WARNING the lens in the disc player of the unit. Called lens fogging, this condensation on the lens may not allow discs to play. In such a situation, To prevent injury or fire, take remove the disc and wait for the condensation the following precautions: to evaporate. If the unit still does not operate normally after a while, consult your Kenwood • To prevent a short circuit, never put or leave dealer. any metallic objects (such as coins or metal Precautions on handling discs tools) inside the unit. • Do not watch or fix your eyes on the unit’s display when you are driving for any extended • Do not touch the recording surface of the disc. period. • Do not stick tape etc. on the disc, or use a disc with tape stuck on it. • If you experience problems during installation, consult your Kenwood dealer. • Do not use disc type accessories. • Clean from the center of the disc and move Precautions on using this unit outward. -
Page 4: Cleaning The Unit
Quick Start Guide Acquiring GPS signals How To Reset Your Unit The first time you turn on this unit, you must If the unit or the connected unit fails wait while the system acquires satellite signals to operate properly, reset the unit. for the first time. This process could take up to several minutes. Make sure your vehicle is outdoors in an open area away from tall Press the <Reset> button. buildings and trees for fastest acquisition. The unit returns to factory settings. After the system acquires satellites for the first time, it will acquire satellites quickly each time thereafter. -
Page 5: Safety Precautions And Important Information
DNX7280BT/DNX5280BT/DNX4280BT/DNX5580BT afety Precautions and Important Information Read this information carefully before starting to The navigation system will not display the correct operate the Kenwood Car Navigation System and current position of the vehicle the first time it is follow the instructions in this manual. Neither used after purchase, or if the vehicle battery is Kenwood nor Garmin shall be liable for problems disconnected. GPS satellite signals will soon be or accidents resulting from failure to observe the received, however, and the correct position will instructions in this manual. be displayed. Be careful of the ambient temperature. Using the navigation system at extreme temperatures can lead to malfunction or damage. Also note that 2WARNINGS the unit can be damaged by strong vibration, by To prevent injury or fire, take the following metal objects, or by water getting inside the unit. precautions: • To prevent a short circuit, never put or leave any 2CAUTIONS metallic objects (such as coins or metal tools) inside the unit. Failure to avoid the following potentially • Do not watch or fix your eyes on the unit's... -
Page 6: First Step
Quick Start Guide Map Data Information irst Step One of the goals of Garmin is to provide customers with the most complete and Power on the unit and perform some accurate cartography that is available to us at setup steps before using. a reasonable cost. We use a combination of governmental and private data sources, which we identify in product literature and copyright Press the <NAV>, <MENU>, or <TEL> messages displayed to the consumer. Virtually button. all data sources contain some inaccurate or incomplete data. In some countries, complete and accurate map information is either not available or is prohibitively expensive. The unit is turned on. ●... - Page 7 DNX7280BT/DNX5280BT/DNX4280BT/DNX5580BT Touch the corresponding Touch [Finish]. key and set the value. NOTE • For details on operations of each setting, refer to the Instruction Manual. • You can adjust the front panel button (ATT button, etc.) sensitivity of . For details, refer to Panel Switch Sensitivity (P.68) in the Instruction Manual. Language Select the language used for the control screen and setting items. Default is “British English (en)” for DNX7280BT/DNX5280BT/ DNX4280BT and “Russian” for DNX5580BT. After setting, touch [Enter]. Angle Adjust the position of the monitor. Default is “0”. After setting, touch [ iPod AV Interface Use Set the terminal which your iPod is connected to. Default is “iPod”. Color Set the screen and button illumination color. You can select whether to perform color scan and adjust scanning color.
-
Page 8: Basic Operations
Quick Start Guide asic Operations Functions Of The Buttons On The Front Panel DNX7280BT... - Page 9 DNX7280BT/DNX5280BT/DNX4280BT/DNX5580BT Number Name Motion fi (Reset) • If the unit or the connected unit fails to operate properly, the unit returns to factory settings when this button is pressed (Instruction Manual P.92). • Switches attenuation of the volume on/off. • Pressing for 1 second turns the screen off. ∞, 5 (Vol) Adjusts volume. Holding down a key turns up the volume in series up to 25. For more than 25, pressing the key turns up the volume one by one. • Displays Graphic Equalizer screen (Instruction Manual P.82).* • Pressing for 1 second switches camera view display on/off. • Displays the navigation screen. • Pressing for 1 second switches AV out sources. • When the power off, turns the power on. • Displays the Top Menu screen (Instruction Manual P.17). MENU • Pressing for 1 second turns the power off. • When the power off, turns the power on. • Displays the Hands Free screen (Instruction Manual P.56). • Pressing for 1 second displays the Screen Control screen. • When the power off, turns the power on. 0 (Eject) • Ejects the disc. • Pressing for 1 second opens the panel to the location of the disc slot. When the panel is opened, pressing for 1 second closes the panel and pressing for 3 seconds ejects the disc forcibly. • When the panel is closed, pressing for 3 seconds fully opens the panel to the location of the SD card slot.
- Page 10 Quick Start Guide DNX5280BT/DNX4280BT/DNX5580BT...
- Page 11 DNX7280BT/DNX5280BT/DNX4280BT/DNX5580BT Number Name Motion fi (Reset) • If the unit or the connected unit fails to operate properly, the unit returns to factory settings when this button is pressed (Instruction Manual P.92). • If the SI function is turned on, this indicator flashes when the vehicle ignition is off (Instruction Manual P.69). • Displays the Top Menu screen (Instruction Manual P.17). MENU • Pressing for 1 second turns the power off. • When the power off, turns the power on. • Displays the navigation screen. • Pressing for 1 second switches AV out sources. • Displays the Hands Free screen (Instruction Manual P.56). • Pressing for 1 second turns the screen off. Volume Knob • Pressing switches attenuation of the volume on/off. • Turning adjusts volume up or down. • Pressing for 1 second displays Tone Control screen (Instruction Manual P.83).* SCRN • Displays the Screen Control screen. • Pressing for 1 second displays rear view camera display. Remote • Receives the remote control signal. You can enable or disable this feature by Remote Sensor (Instruction Manual P.67).
-
Page 12: Common Operations
Quick Start Guide Common Operations General There are some functions which can [Menu] be operated from most screens. Returns to the Top Menu screen. (RETURN) Returns to previous screen. (common menu key) Touch to display the common menu. The contents of the menu are as follows. : Displays the EXT SW Control screen. : D isplays the SETUP Menu screen. : D isplays the Audio Control Menu screen. : D isplays the control screen of current source. Icon feature differs depending on the source. : C loses the menu. -
Page 13: Detaching The Front Panel
DNX7280BT/DNX5280BT/DNX4280BT/DNX5580BT Detaching The Front Panel You can detach the front panel to prevent theft. Press the <0> button for 3 seconds Detach the panel as the diagram to open the front panel. below. Then, detach the panel as the diagrams below. -
Page 14: How To Use The Navigation System
GPS satellite strength. Finds a destination. Views the map. Adjusts the settings. Uses the tools such as ecoRoute and Help. NOTE • You can get additional information about using the navigation system from Help. To display Help, touch [Tools] and then touch [Help]. • For more information about your navigation system, download the latest version of the Owner’s Manual from manual.kenwood.com/edition/im324. Enter your destination and start the guidance. ● Finding points of interest NOTE 1) Touch [Where To?]. • To enter letters contained in the name, 2) Touch [Points of Interest]. touch [Where To?] - [Points of Interest] - [Spell Name]. 3) Select a category and a • To search for a location in a different area,... - Page 15 Garmin and Kenwood will not be responsible for any traffic fines or citations that you may receive for failing to follow all applicable traffic laws and signs.
-
Page 16: Other Features
The traffic map shows color-coded traffic flow and delays on nearby. ● About traffic NOTICE • Garmin and Kenwood are not responsible for the accuracy or timeliness of the traffic information. With an FM traffic receiver, the navigation system can receive and use traffic information. -
Page 17: How To Play Music
DNX7280BT/DNX5280BT/DNX4280BT/DNX5580BT ow To Play Music You can play audio files from music CD, disc media, USB storage device, SD card and iPod. NOTE • For details on playable file format, media format, iPod model, etc., refer to the Instruction Manual. Connect the media you want to play as show below. Disc 1) Press the <0> button for 1 second to open the front panel. -
Page 18: Search The Track/File You Want To Listen To
Quick Start Guide Control the music you are listening to on the source control screen. The following symbols indicate the keys on the screen. The functions of the keys are the same despite the difference of the source you are listening to. Touch [ Basic operations from this screen Plays or pauses:... -
Page 19: How To Play Movie/Picture
DNX7280BT/DNX5280BT/DNX4280BT/DNX5580BT ow To Play Movie/Picture You can play DVD video, Video CD (VCD), movie files from disc media, iPod, and picture files from USB storage device and SD card. NOTE • For details on playable file format, device format, etc., refer to the Instruction Manual. Connect the media you want to play. For the method of connecting, see How To Play Music (P.17). -
Page 20: How To Listen To The Radio
Quick Start Guide ow To Listen To The Radio Touch [Menu] on any screen. Top Menu screen appears. Touch [TUNER]. The unit switches to the radio source. Operate on the source control screen. ● Station search 1) Touch [ Sub function menu appears. 2) Touch [AM] or [FM] to select the band. -
Page 21: How To Make A Phone Call
DNX7280BT/DNX5280BT/DNX4280BT/DNX5580BT ow To Make A Phone Call You can use your Bluetooth cell-phone when paired to this unit. Register your cell-phone to the unit. Follow the procedures shown below. For detailed operation, see Registering the Bluetooth Unit (P.53) in the Instruction Manual. -
Page 22: Make Or Receive A Phone Call
Quick Start Guide Make or receive a phone call. See the table below for each operation method. Call by entering a phone number 1 Touch [Direct Number]. 2 Enter a phone number with number keys. 3 Touch [ Call using call records 1 Touch [Incoming Calls], [Outgoing Calls], or [Missed Calls]. 2 Select the phone number from the list. 3 Touch [ Redial 1 Touch [Redial] to display the previously called number. 2 Touch [ Call using the phonebook 1 Touch [Phonebook]. -
Page 23: Installation Procedure
DNX7280BT/DNX5280BT/DNX4280BT/DNX5580BT • If the console has a lid, make sure to install nstallation Procedure the unit so that the faceplate will not hit the lid when closing and opening. • If the fuse blows, first make sure the wires aren’t touching to cause a short circuit, Before Installation then replace the old fuse with one with the same rating. Before installation of this unit, please • Insulate unconnected wires with vinyl tape note the following precautions. or other similar material. To prevent a short circuit, do not remove the caps on the ends of the unconnected wires or the terminals. WARNINGS • Connect the speaker wires correctly to the • If you connect the ignition wire (red) terminals to which they correspond. The and the battery wire (yellow) to the car... -
Page 24: Installation Procedure
Quick Start Guide 2 Make the proper input and Installation Procedure output wire connections for each unit. Supplied accessories 3 Connect the wire on the wiring harness. First of all, make sure that all 4 Take Connector B on the wiring accessories are supplied with the unit. -
Page 25: Attaching The Front Panel
DNX7280BT/DNX5280BT/DNX4280BT/DNX5580BT Attaching the front panel GPS antenna Hold the front panel securely so as GPS antenna is installed inside of not to drop it accidentally. Fit the the car. It should be installed as panel onto the attaching plate until it horizontally as possible to allow easy is firmly locked. -
Page 26: Removing Procedure
Quick Start Guide Microphone unit Removing Procedure 1) Check the installation position of Removing the hard rubber the microphone (accessory 9). frame (escutcheon) 2) Remove oil and other dirt from the installation surface. 1) Engage the catch pins on the 3) Install the microphone. -
Page 27: Removing The Unit
DNX7280BT/DNX5280BT/DNX4280BT/DNX5580BT Removing the unit Connector Function Guide 1) Remove the hard rubber frame by Pin Numbers Cable Color Functions referring to step 1 in "Removing for ISO Connectors the hard rubber frame" (P.26). External Power 2) Insert the two removal tools... -
Page 28: Connection
(2) below to install this unit to the Volkswagen vehicles etc. (1): Default setting A: Black The red (A-7 pin) of the vehicle’s ISO connector is (Ground wire) linked with the ignition, and the yellow (A-4 pin) is *DNX7280BT only connected to the constant power supply. B: Yellow (Battery wire) Red (Ignition cable) Red (A-7 pin) ILLUMI C: Red Unit Vehicle... - Page 29 DNX7280BT/DNX5280BT/DNX4280BT/DNX5580BT Connecting wires to terminals (2) Connect to the vehicle’s Accessory 1 parking brake detection switch harness. Light Green (Parking sensor wire) PRK SW For best safety, be sure to connect the parking sensor. Purple/White (Reverse sensor wire) REVERSE Connect to vehicle’s reverse lamp harness when using the optional rear view camera.
-
Page 30: System Connection
Quick Start Guide System connection Refer to the box1 below Refer to Refer to Accessory 2 the box2 below the box2 below AV input* iPod/AV input 2 CA-C3AV CA-C3AV (Optional accessory) (Optional Accessory) Green/Red To Camera control terminal Green/White Blue/Red To Relay Box Blue/Red Accessory 4... -
Page 31: Optional Accessory Connection
(Optional Accessory) USB terminal (0.8m) AV Output USB terminal - KCA-iP202: 1.8 m - KCA-iP22F: 0.8 m USB maximum power supply USB terminal current: 1A (5V) DNX7280BT, DNX5580BT, and DNX5280BT only TV Tuner (Optional Accessory) Connection cable (Included in the TV tuner) *1 DNX5580BT and DNX5280BT only... -
Page 32: About This Unit
Quick Start Guide ■ ■ The marking of products using lasers About This Unit CLASS 1 ■ ■ Copyrights LASER PRODUCT • The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Kenwood Corporation is under license. Other The label is attached to the chassis/case and says trademarks and trade names are those of their that the component uses laser beams that have been respective owners. classified as Class 1. It means that the unit is utilizing • The “AAC” logo is a trademark of Dolby Laboratories. laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit. • “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has ■ ■ Information on Disposal of Old... - Page 33 DNX7280BT/DNX5280BT/DNX4280BT/DNX5580BT Declaration of Conformity with regard to the EMC Directive 2004/108/EC Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC Manufacturer: Kenwood Corporation 2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan EU Representative’s: Kenwood Electronics Europe BV Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands English Magyar Hereby, Kenwood declares that this unit DNX7280BT, DNX5580BT, Alulírott, Kenwood, kijelenti, hogy a jelen DNX7280BT, DNX5580BT, DNX5280BT, DNX4280BT is in compliance with the essential DNX5280BT, DNX4280BT megfelel az 1999/5/EC irányelvben requirements and other relevant provisions of Directive 1999/5/EC. meghatározott alapvető követelményeknek és egyéb vonatkozó előírásoknak. Français Svenska Par la présente Kenwood déclare que l’appareil DNX7280BT, DNX5580BT, DNX5280BT, DNX4280BT est conforme aux exigences Härmed intygar Kenwood att denna DNX7280BT, DNX5580BT,...