Chapter 2. Lenovo ScrollPoint Mouse
This chapter contains installation, usage, and maintenance information for the Lenovo ScrollPoint Mouse.
Product Description
The Lenovo ScrollPoint Mouse includes a ScrollPoint to control scrolling and other functions. The mouse
includes a PS/2 and USB connector and can be connected to any enabled USB port.
The mouse works with computers that use the following operating systems:
v Windows 2000 Professional
v Windows XP
v Windows Vista
v Operating systems that support USB connectivity
v PS/2 ports on computers using the Windows NT Workstation operating system.
This package contains:
v One Lenovo ScrollPoint Mouse
v One CD-ROM containing installation software and an online User's Manual
v One USB to PS/2 adapter
Installing the Mouse Suite Software
Included in your package is a CD-ROM containing installation software for the mouse. To install the
Mouse Suite Software, complete the following procedure:
1. Turn on the computer and start the operating system.
2. Insert the Device Driver CD into your CD-ROM drive. Click the Driver arrow. If the setup program
does not open, go to Step 3. If the setup program opens, go to Step 6.
3. Click Start.
4. Click Run.
5. In the command line, type X:\setup where X is the drive letter for your CD-ROM drive.
6. Click OK.
7. Follow the on-screen instructions to complete the Mouse Suite software installation.
Note: When you are prompted, click PS/2 if you will connect the mouse to the standard mouse
connector or click USB if you will use the mouse with a USB connector.
Installing the Mouse
This section contains information for installing the mouse in PS/2 mode and in USB mode.
If a PS/2 mouse is plugged into your computer, you must first turn off your computer prior to removing
this mouse. Plug in your mouse and restart your computer. If a message displays indicating that you do
not have a PS/2 mouse connected, ignore the message and continue.
Installing the mouse in PS/2 mode
To install the mouse using the Windows NT Workstation operating system, do the following:
1. Turn off your computer.
2. Remove any mouse that is connected to the PS/2 connector.
© Lenovo 2005, 2008. Portions © IBM Corp. 2005.
2-1