Refrigerator; Preparing To Install The Refrigerator - GE 2 Owner's Manual

Preparing to install the refrigerator.

Read these instructions completely and carefully.
Refrigerator Location
Do not install the refrigerator where the
temperature will go below 50°F (10°C) because
it will not run often enough to maintain proper
temperatures.
Install it on a floor strong enough to support it
fully loaded.
If the Model 2 is placed on a countertop or stand,
the front surface of the door should be 3" or
more back from the edge of the countertop or
stand to avoid accidental tipping of the appliance
during normal use.
Clearances
Allow the following clearances for ease of
installation and proper air circulation.
Sides 1/2" (13 mm)
Top 2" (51 mm)
Back 2" (51 mm) from the rear cabinet surface
to the wall
Leveling Legs
Adjustable legs at the front corners of the
refrigerator should be set so the refrigerator is firmly
positioned on the floor and the front is raised just
enough that the door closes easily when opened
about halfway.
To adjust the leveling legs, turn the legs
counterclockwise to raise the refrigerator,
clockwise to lower it.
(on some models)
Do not install it closer than 5" (13 cm) next
to a range.
Do not install it in a recessed area.
Do not build in the refrigerator.
Turn counterclockwise to raise,
clockwise to lower.
7