Sony Cyber-Shot DSC-S600 Service Manual page 156

After that, the next message is displayed. Then, change the chart
in accordance with the message.
Fig. 6-1-20
[OK]
4) Click the button, and the items from "3. F No. Compen-
sation" to "6. Light Value Adj." will be executed.
5) Upon successful completion of "6. Light Value Adj.", the fol-
lowing message is displayed. Change the chart in accordance
with the message.
Fig. 6-1-21
[OK]
6) Click the button, and the "7. AWB 3200K-5800K Stan-
dard Data Input" and "8. AWB 3200K-5800K Check" will be
executed.
7) After that, "9. Color Reproduction Adj. & Check" will be ex-
ecuted. Upon completion of adjustment, the check result is
displayed on the Color Reproduction Check screen.
Fig. 6-1-22
DSC-S600_ADJ
At this time, the following message is displayed, and click the
[Yes] button if the check result display at the upper right of
Color Reproduction Check screen is OK, or the [No] button if
NG.
8) Upon successful completion of "9. Color Reproduction Adj.
& Check", the following message is displayed. Change the
chart in accordance with the message.
[OK]
9) Click the button, and the items from "10. CCD Linearity
Check" to "13. Release of Data Setting during Camera Adj."
will be executed.
10) Upon successful completion of all items of the CAMERA
Adjustment 3, the following message is displayed. Click the
[OK]
button.
6-14
Fig. 6-1-23
Fig. 6-1-24
Fig. 6-1-25