4.
5.
6.
UPnP
Universal Plug and Play (UPnP) is an architecture in Windows XP that supports peer-to-peer
Plug and Play fuctionality for network devices. UPnP is enabled on the camera by default. To
use this function, UPnP must be also be installed on your computer.
To install UPnP in Windows XP:
1.
2.
3.
4.
In the Trap community field, specify the community name to use when sending a trap
message to the management server. The default value is <public>.
Optionally, select the Warm start check box to have the camera perform a software reload
when a trap message is sent.
Click Save.
Open the Start menu and click Run. Type appwiz.cpl, and then click OK.
Click Add/Remove Windows Components.
In the Windows Components Wizard dialog box (see
window, click Networking Services, and then click Details.
Figure 7-11
Windows Components Wizard Dialog Box
In the Networking Services dialog box (see
Networking Services window, select the UPnP User Interface check box, and click OK.
Configuring System Settings | 105
Figure
7-11), in the Components
Figure
7-12), in the Subcomponents of
800-11873V2 - A - 07/2013