Download Print this page

Fujitsu Environmentally Enhanced Convertible Bump Case User Manual page 6

Advertisement

Protective Cover
Velcro Strip #2
Clear lens
Modular
Bay Cover
Removable USB
Velcro Strip #1
Port Cover
Figure 7. System in Tablet Configuration
Shoulder Strap
There are D-rings on all four corners of the case. To attach
the shoulder strap, open the spring-loaded clips on the end
of the strap, and attach them to two of the D-rings. The D-
rings can also be used as an attachment point for a pen
tether. (Figure 2 shows the location of the D-rings.)
Modular Bay Cover
There is a cover over the modular bay slot that is attached
with two snaps. To access the modular bay, simply unsnap
the two snaps. NOTE: The modular bay cover is to be used
only for removing and replacing a modular battery. Do
NOT attempt to open the optical disc drive tray through this
slot, otherwise it could be damaged.
6

Advertisement

loading