Pedestal - LG DLEX8388WM Training Manual

TRAINING MANUAL
REAR
DLEX8388WM
INSTALLATION
Remove the pedestal, installation hardware,
and instructions from the shipping
container.
Level the pedestal on a solid, flat, level
floor. Lock down the rear adjusters, but
leave the front ones free for now.
Set the dryer on the pedestal and level it.
Level it and lock down all four adjusters on
the dryer.
Note which holes are for the washer and
which are for the dryer. If you are stacking
the appliances, the washer should be on
the bottom.
FRONT
Remove the protective paper from the
adhesive surface of the bracket.
Be particularly careful, because when this
adhesive makes contact, there is no
adjustment possible.
NOTE: Some kits include two sets of
brackets (curved for the dryer and flat
(shown) for the washer.) Use the correct
bracket for your application. The curved
bracket is for clearance of the exhaust vent
when a dryer has been converted to side
venting. (See next page.)
Page 12

(Pedestal)

For 27" Pedestals
(Washer, Dryer, and Combo)
DLEX8377WM
STEAM DRYER