Operation Air Flow Direction Adjustment Unit start / stop 1.Status display of air flow Press button to enter additional options, when cycle display to will flash. And then press Remote controller enter to up and down air flow function. Press button.
Operation Timer On/Off On-Off Operation TURBO/QUIET Operation (This function is unavailable on some models.) 1.After unit starts, select your desired operation mode. TURBO Operation 2.Press TIMER button to change TIMER mode. Every When you need rapid heating or cooling, you can use this function. time the button is pressed, display changes as follows: Press TURBO button, the remote controller will show Remote controller:...
Operation Comfortable SLEEP 5. When quiet sleeping function is set to 8 hours the quiet sleeping time can not be adjusted.When TIMER function is set,the quiet sleeping function can't be set up.After the sleeping function is set up,if user resets TIMER function, the Press button , the remote controller will sleeping function will be cancelled;...
Maintenance For Smart Use of The Air Conditioner Remote Controller Indoor Body Setting of proper room Do not block the air inlet temperature or outlet Proper Wipe the air conditioner by using a soft and temperature dry cloth.For serious stains,use a neutral Do not use water ,wipe the controller with a detergent diluted with water.Wring the water dry cloth.Do not use glass cleaner or chemical...
Page 7
Cautions WARNING Please call Sales/Service Shop for the Installation. Do not attempt to install the air conditioner by yourself because improper works may cause electric shock, fire, water leakage. WARNING Check proper When abnormality such as burnt-small found, Use an exclusive immediately stop the operation button and power source installation of the...
Trouble shooting Cautions Before asking for service, check the following first. The machine is adaptive in following situation Cause or check points Phenomenon 1.Applicable ambient temperature range: When unit is stopped, it won't restart The system does not restart immediately until 3 minutes have For: T1 C/23 immediately.