NEC LCD19WV User Manual
Display monitor
Hide thumbs
Also See for LCD19WV:
- User manual (71 pages) ,
- Technical specifications (2 pages) ,
- Specifications (2 pages)
Related Manuals for NEC LCD19WV
Summary of Contents for NEC LCD19WV
- Page 1 LCD19WV LCD22WV User’s Manual...
-
Page 2: Declaration Of The Manufacturer
Therefore, it should be read carefully in order to avoid any problems. Caution: When operating the LCD19WV/LCD22WV with a 220-240V AC power source in Europe, use the power cord provided with the monitor. In the UK, a BS approved power cord with a moulded plug has a Black (five Amps) fuse installed for use with this equipment. -
Page 3: For The Customer To Use In U.s.a. Or Canada
Ce produit porte la marque ‘C-UL’ et se conforme aux règlements de sûrele Canadiens selon CAN/CSA C22.2 No. 60950-1. FCC Information Use the attached specified cables with the LCD19WV/LCD22WV colour monitor so as not to interfere with radio and television reception. -
Page 4: Quick Start
Contents Your new NEC LCD monitor box* should contain the following: • LCD monitor with tilt base • Power Cord • Video Signal Cable • User’s Manual • CD-ROM • Base Stand • Cable Holder User’s Manual Power Cord Video Signal Cable... -
Page 5: Remove Monitor Stand For Mounting
3. Connect one end of the power cord to the monitor and the other end to the power outlet. Use the Cable holder to keep the Video Signal Cable and power cord together (Figure B.1). 4. To attach the Cable Holder: Attach the Cable Holder on to the Base. -
Page 6: Removing The Base
4 x 12 mm with lock washer and flat washer 12 mm Thickness of Bracket (Arm) 2.0 ~ 3.2 mm 100 mm Tighten all screws 100 mm Specifications 4-SCREWS (M4) (MAX depth: 8.5 mm) Weight of LCD assembly: 4.2 kg (MAX) - (LCD19WV) 5.0 kg (MAX) - (LCD22WV) English-5... - Page 7 Controls OSD (On-Screen Display) control buttons on the front of the monitor function as follows: 1. Basic Key function – / < + / > RESET AUTO MENU Button (LCD22WV Only) OSD Off Message displayed Active Auto Shortcut to Luminance Shortcut to Luminance OSD displayed.
-
Page 8: Osd Setup
Luminance OSD Setup Contrast H. Position Contrast from Digital-register. Adjusts the horizontal position of the OSD. Brightness V. Position Backlight Adjustment. Adjusts the verticalposition of the OSD. Image Setup OSD Timeout Adjusts the OSD timeout. Focus Language Adjusts Picture Phase to reduce Horizontal-Line noise. - Page 9 OSD Locked When the OSD is unlocked, keep holding down “Menu” key and press “Power” key once to turn on the monitor, the OSD will be locked and show this message. When the OSD is locked, only Power key function is still working, if user presses any other key it will also show this message.
-
Page 10: Recommended Use
NOTE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use. - Page 11 CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • For optimum performance, allow 20 minutes for warm-up. • Adjust the monitor height so that the top of the screen is at or slightly below eye level. Your eyes should look slightly downward when viewing the middle of the screen.
- Page 12 Specifications - LCD19WV Monitor Specifications LCD19WV Monitor Notes LCD Module Diagonal: 48.1 cm/19 inches Active matrix; thin film transistor (TFT) Viewable Image Size: 48.1 cm/19 inches liquid crystal display (LCD); 0.285 mm dot Native Resolution (Pixel Count): 1440 x 900 pitch;...
- Page 13 Specifications - LCD22WV Monitor Specifications LCD22WV Monitor Notes LCD Module Diagonal: 54.9 cm/21.6 inches Active matrix; thin film transistor (TFT) Viewable Image Size: 54.9 cm/21.6 inches liquid crystal display (LCD); 0.277 mm dot Native Resolution (Pixel Count): 1680 x 1050 pitch;...
- Page 14 Features Reduced Footprint: Provides the ideal solution for environments requiring superior image quality but with size and weight limitations. The small footprint and low weight allow it to be moved or transported easily from one location to another. No-touch Auto Adjust: No-touch Auto Adjust automatically adjusts the monitor to optimal settings upon initial setup. Plug and Play: The Microsoft solution with the Windows operating system facilitates setup and installation by allowing the monitor to send its capabilities (such as screen size and resolutions supported) directly to your computer, automatically optimizing display performance.
-
Page 15: Troubleshooting
NOTE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends using a screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use. Image is unstable, unfocused or swimming is apparent •... - Page 16 TCO’03 Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the impact on our natural environment.
-
Page 17: Manufacturer's Recycling And Energy Information
Manufacturer’s Recycling and Energy Information NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’s top priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally- friendly products, and always strive to help define and comply with the latest independent standards from agencies such as ISO (International Organisation for Standardization) and TCO (Swedish Trades Union).