Share Live Video Or Video Clips - Nokia N96 User Manual

your device. Your service provider may send you the
settings over the air or give you a list of the needed
parameters.
To add a SIP address to a contact card, do the following:
1. Press , and select Contacts.
2. Open the contact card (or start a new card for that
person).
3. Select Options Add detail
>
4. Enter the SIP address in the format
username@domainname (you can use an IP
address instead of a domain name).
If you do not know the SIP address for the contact,
you can use the phone number of the recipient,
including the country code, to share video (if
supported by the network service provider).
UMTS connection settings
To set up your UMTS connection, do the following:
Contact your service provider to establish an
●
agreement for you to use the UMTS network.
Ensure that your device UMTS access point
●
connection settings are configured properly.

Share live video or video clips

During an active voice call, select
video:
1.
Share video.
>
2.
Options Share
>
To share live video during the call, select
video.
To share a video clip, select
video clips saved in the device memory, the mass
memory, or a memory card (if available) opens.
Select the clip you want to share.
You may need to convert the video clip into a
suitable format to be able to share it. If
be converted for sharing. Continue?
select OK.
Your device sends the invitation to the SIP address.
If the recipient has several SIP addresses or phone
numbers including the country code saved in
Contacts, select the desired address or number. If
the SIP address or phone number of the recipient is
not available, enter the address or number of the
recipient including the country code, and select
OK to send the invitation.
Sharing begins automatically when the recipient
accepts the invitation.
Options during video sharing
to zoom the video (available for sender only)
to adjust the brightness (available for sender
only)
or to mute or unmute the microphone
or to switch the loudspeaker on and off
Live
Recorded clip. A list of
Clip must
is shown,
137