When Using A Memory Card; When Using The Lcd; When Storing, Maintaining, Or Transporting P-20007 - Epson Viewer P-2000 User Manual

When using a memory card

❏
Only memory cards designed for the product's
specifications can be used.
❏
Do not remove a memory card or turn off the
product while the Access lamp is flashing. See
"LCD and control panel" on page 11 to find where
the Access lamp is.

When using the LCD

❏
The LCD panel on this product may contain a few
small bright or dark spots. These are normal and
do not mean that your LCD panel is damaged in
any way.
❏
If the LCD panel on this product is damaged,
consult your dealer.
❏
If the liquid crystal solution contained in the LCD
panel on this product leaks out and gets onto your
hands, wash them thoroughly with soap and
water. If it gets into your eyes, flush them
immediately with water. If discomfort or vision
problems remain after a thorough flushing, see a
doctor immediately.
❏
Only use a soft, dry cloth to clean the display. Do
not use liquid or chemical cleaners.
When storing, maintaining, or transporting
P-2000
❏
Do not store this product outdoors.
❏
Do not store this product near water.
❏
Do not store this product in a location subject to
high temperature or humidity.
❏
Do not store this product in a location subject to
rapid changes in temperature or humidity.
❏
Do not store this product in a location subject to
direct sunlight or strong light sources.
❏
Unplug this product from the power outlet before
cleaning it. Use a damp cloth for cleaning and do
not use liquid or aerosol cleaners.
1
1
1
1
1
1
1
1
1
1
7
Introduction