Auto Mode / Hybrid; Connecting To Access Points In The List - Canon PowerShot Elph 340 HS IXUS 265 HS User Manual

Connecting to Access Points in the List

1
View the listed access points.
z z
View the listed networks (access
points) as described in steps 1 – 4 of
"Connecting to WPS-Compatible Access
Points"
2
Choose an access point.
z z
Press the <o><p> buttons to choose a
network (access point), and then press
the <m> button.
3
Enter the access point
password.
z z
Press the <m> button to access the
keyboard, and then enter the password
(= 93).
z z
Press the <o><p> buttons to choose
[Next], and then press the <m> button.
(= 94).
4
Choose [Auto].
z z
Press the <o><p> buttons to choose
[Auto], and then press the <m> button.
z z
If you selected [{], [2], or [
target device, see "Connecting to WPS-
Compatible Access Points", starting with
step 9 (=
z z
If you selected a Web service as the
destination, see "Connecting to WPS-
Compatible Access Points", starting with
step 12
•
To determine the access point password, check on the access point itself or
refer to the user manual.
•
Up to 16 access points will be displayed. If no access points are detected,
choose [Manual Settings] in step 2 to manually set an access point. Follow on-
screen instructions and enter an SSID, security settings, and a password.
•
When you use an access point that you have already connected to for
connecting to another device, [*] is displayed for the password in step 3. To
use the same password, press the <o><p> buttons to choose [Next], and
then press the <m> button.
] as the
95).
(= 96).
Before Use Before Use
Basic Guide Basic Guide
Advanced Guide Advanced Guide
Camera Basics Camera Basics

Auto Mode / Hybrid

Auto Mode / Hybrid
Auto Mode Auto Mode
Other Shooting Other Shooting
Modes Modes
P Mode P Mode
Playback Mode Playback Mode
Wi-Fi Functions Wi-Fi Functions
Setting Menu Setting Menu
Accessories Accessories
Appendix Appendix
Index Index
97