Brother DCP-J152W User Manual page 50

Error Message
Paper Jam
Unable to CleanXX
Unable to Init.XX
Unable to PrintXX
Unable to ScanXX
Wrong Ink Colour
Wrong Paper Size
44
Cause
The paper is jammed in the machine. Remove the jammed paper by
Paper dust has accumulated on the
surface of the paper pick-up rollers.
The machine has a mechanical
problem.
—OR—
A foreign object, such as a paper clip
or a piece of ripped paper, is in the
machine.
An ink cartridge has been installed in
the wrong position.
The Paper Size setting does not
match the size of paper in the tray. Or,
you did not set the paper guides in the
tray to the indicators for the paper
size you are using.
Action
following the steps in Printer jam or
paper jam on page 45.
Make sure the paper length guide is
set to the correct paper size.
If there is a repeat paper jam, a small
piece of paper may be stuck in the
machine. Make sure paper is not still
jammed in the machine. (See
Additional paper jam clear operations
on page 48.)
Clean the paper pick-up rollers.
(See Advanced User's Guide:
Cleaning the paper pick-up rollers.)
Open the scanner cover and remove
any foreign objects and paper scraps
from inside the machine. If the error
message continues, disconnect the
machine from the power for several
minutes and reconnect it.
Check which ink cartridges are not
matched by colour to their ink
cartridge positions and move them to
their correct positions.
1 Check that the Paper Size you
choose matches the size of paper
in the tray.
(See Paper Size on page 16.)
2 Make sure you loaded the paper
in a Portrait position, by setting
the paper guides at the indicators
for your paper size. (See Loading
paper and other print media
on page 10.)
3 After you have checked the paper
size and the paper position, press
Mono Start or Colour Start.
If you are printing from your
computer, make sure the paper size
you choose in the printer driver
matches the size of paper in the tray.
(See Software and Network User's
Guide.)