Motion Detection - D-Link DCS-2330L User Manual

Section 3: Configuration
Enabling Video Motion will allow your camera to use the motion detection feature. You may draw a finite motion area that will be used for
monitoring. After making any changes, click the Save Settings button to save your changes.
Enable Video
Select this box to enable the motion detection
Motion:
feature of your camera.
Sensitivity:
Specifies the measurable difference between two
sequential images that would indicate motion. Please
enter a value between 0 and 100.
Percentage:
Specifies the amount of motion in the window being
monitored that is required to initiate an alert. If this
is set to 100%, motion is detected within the whole
window will trigger a snapshot.
Draw Motion Area:
Draw the motion detection area by dragging your
mouse in the window (indicated by the red square).
Erase Motion Area:
To erase a motion detection area, simply click on the
red square that you wish to remove.
Right clicking on the camera image brings up the
following menu options:
Select All: Draws a motion detection area over
the entire screen.
Clear All: Clears any motion detection areas that
have been drawn.
Restore: Restores the previously specified motion
detection areas.
D-Link DCS-2330L User Manual

Motion Detection

43