Pre-Wash; Brightness; Volume - Miele G 6370 Operating Instructions Manual

Pre-wash

You can use this function to remove
easily loosened food residues in the
programme selected.
Once activated, this function will be
carried out with all programmes until
you deactivate it.
 Select the setting you want and con‐
firm with OK.

Brightness

There are seven different display bright‐
ness settings.
 Select the brightness you want and
confirm this with OK.

Volume

A sequence of audible tones will sound
at the end of the programme or if there
is a fault as long as the buzzer has
been activated.
Buzzer in the event of a fault
A buzzer will sound in the event of a
fault 4 times at intervals with a short
pause between each set of tones.
The buzzer which sounds when there
is fault cannot be deactivated.
Buzzer at the end of a programme
The buzzer at the end of a programme
will sound 4 times at intervals with a
short pause between each set of tones.
The volume of the buzzer which sounds
at the end of the programme can be set
to one of seven stages. If no volume is
selected, the buzzer is switched off.
 Select the
Buzzer tones
 Use the  arrow buttons to set the
volume required and confirm you se‐
lection with the OK button.
Keypad tone
An audible tone sounds each time a
button is pressed.
The volume of the keypad tone can be
set to one of seven stages. If no volume
is selected, the keypad tone is switched
off.
 Use the  arrow buttons to set the
volume required and confirm your se‐
lection with the OK button.
Settings menu
option.
91