Day/Night Mode - D-Link DCS-933L User Manual

Section 3 - Configuration
This section allows you to configure the Day and Night mode settings. Day mode uses the infrared cut filter to provide a corrected color image for
times where there is available lighting. Night mode moves the filter out of the way to use all available light, and turns on the IR LED illuminators to
allow for clear black and white video in dark areas with little to no light.
Auto:
This mode will automatically switch between Day and Night mode based on
the amount of available lighting.
Manual: This mode allows you to manually switch between modes through the Live
Video page.
Always Day
This sets the camera to always use Day mode.
Mode:
Always Night This sets the camera to always use Night mode.
Mode:
Day Mode
This sets the camera to use Day mode during the times you specify, and will
Schedule: switch to Night mode outside the times you specify.
D-Link DCS-933L User Manual

Day/Night Mode

38 38