Adding A Dvr Service To The Sam - Cisco DVR Configuration Manual

Adding a DVR Service to the SAM

The Application URL that you enter when creating a SAM DVR service determines
whether the DVR service uses open (global) or conditional (package) access.
Follow these instructions to globally or conditionally authorize DVRs for the DVR
service.
1 On the DNCS Administrative Console, click the Application Interface Modules
tab.
2 Click SAM Service. The SAM Service List window opens.
3 Click File and select New. The Set Up SAM Service window opens.
4 Follow these instructions to enter data in the fields of the Set Up SAM Service
window:
 Service Name: Enter a name for the DVR service, such as DVR Enable.
 Short Description: Enter a short description (up to 5 alphanumeric
characters) for the DVR service, such as DVR. Subscribers see the short
description in the channel banner when DVR service is activated.

Long Description: Enter a long description (up to 32 alphanumeric
characters) for the DVR service. This information is for your use only.
Subscribers will not see the text that you enter here.

Application URL: Enter one of the following URLs according to how you
want to offer this service:
–
–
4011411 Rev B
Open access (global method): To offer the DVR service to all subscribers
who have a DVR, enter bfs://resapp/pvrac.
Controlled access (package method): To limit the DVR service only to
subscribers who have a DVR and who are authorized for the DVR
package, enter bfs://resapp/pvrac;EID=#, replacing the # symbol with the
decimal equivalent of the EID for the DVR package.
Note: To obtain decimal equivalent of the EID, refer to step 13 of Adding
a DVR Package to the DNCS (on page 3).

Adding a DVR Service to the SAM

5