Stp Instance Settings - D-Link DES-1228/ME User Manual

The user may configure the following parameters for a MSTI on the Switch.
Parameter
MSTI ID
Type
VID List (1-4094)
Click Apply to implement changes made.

STP Instance Settings

The following window displays MSTIs currently set on the Switch. To view the following table, click L2 Features > Spanning
Tree > STP Instance Settings:
The following information is displayed:
Parameter Description
Instance Type Displays the instance type(s) currently configured on the Switch. Each instance type is classified
by a MSTI ID. CIST refers to the default MSTI configuration set on the Switch.
Instance Status Displays the current status of the corresponding MSTI ID
Instance Priority
Displays the priority of the corresponding MSTI ID. The lowest priority will be the root bridge.
Click Apply to implement changes made.
DES-1228/ME Layer 2 Fast Ethernet Managed Switch
Figure 7- 31. Instance ID Settings window – modify
Description
Displays the MSTI ID previously set by the user.
This field allows the user to choose a desired method for altering the MSTI settings. The
user has four choices.
•
Add - Select this parameter to add VIDs to the MSTI ID, in conjunction with the
VID List parameter.
•
Remove - Select this parameter to remove VIDs from the MSTI ID, in con-
junction with the VID List parameter.
This field is used to specify the VID range from configured VLANs set on the Switch that the
user wishes to add to this MSTI ID. Supported VIDs on the Switch range from ID number 1
to 4094. This parameter can only be utilized if the Type chosen is Add or Remove.
Figure 7- 32. STP Instance Settings window
98