DVG-7022S/7044S/7062 User's Manual
UDT Detection
If the CPT auto detect function is not able to determine whether or not a PSTN-call receiving party has hung
up the phone, then the UDT detection function can serve as a back up. To do this, enter the high/low
frequency parameters from the CPT table into the UDP table.
NOTE: If FXO cut off calls un-normally, please disable this function.
FXS Ring Cadence Settings
FXS Ring Cadence Settings: Specify the ring cadence for the FXS port. In this field, you specify the
on and off pulses for the ring. The ring cadence that should be configured differs depending on local
PSTN or PBX settings and requirements.
D-Link Systems, Inc.
CPT/Cadence Setting
49