Advertisement
Receiving an HDTV Signal
There are three basic ways to receive an HDTV signal on your new TV:
1. Over-the-Air (Antenna)
2. Cable or Phone Company HDTV Service
Connect a high quality outside antenna (not
Cable or phone company HDTV service customers
supplied) directly to the antenna input on
will need to subscribe to High-Definition Service
the TV (reception cannot be guaranteed and
from your local provider. (Additional monthly
is based on proximity to the local signal).
subscription cost may apply.)
Connecting to a High-Definition Input on your TV
You can connect directly from an antenna, or if you are using an HD cable box or HD satellite box, there are three standard connections that can be used to receive an HD signal.
1. Antenna Input
2. HDMI
to HDMI
TM
TM
To connect directly from
HDMI
TM
is the best connection
an antenna or basic cable:
for HDTV. This is a digital
connect the cable directly
connection that carries both
to the antenna input on the
digital video and digital audio.
back of the TV.
INPUT
OUTPUT
INPUT
TV
Cable box/Satellite box
Initial Setup
You must select a Language, either Home/Store mode, and select ANT/CABLE before you can exit out of the Setup Menu. The EXIT button will not function
until these selections have been made.
1. Menu Language
2. Time Zone
Select a language.
Select a time zone
Press ENTER.
Initial Setup
Initial Setup
Menu Language
English
Menu Language
English
Time Zone
Eastern
Time Zone
Eastern
5. Start Scan
Select Start Scan.
Press ENTER.
Channel Program
Press EXIT for no change.
Start Scan
If you want to stop scanning,
press EXIT while scanning.
3. Satellite
Satellite customers will need a High-Definition
satellite receiver and appropriate dish hardware.
(Additional monthly subscription cost may apply.)
3. DVI to HDMI
TM
Your HD Cable Box or HD Satellite Receiver
may have a DVI connection. This will be
connected to the HDMI
jack on the TV using
TM
an HDMI
TM
cable and an HDMI
TM
to DVI
converter. DVI carries digital video only.
Therefore, this will require a separate analog
audio connection as well (use the red and white
audio connections).
TV
OUTPUT
INPUT
Cable box/Satellite box
TV
3. Store / Home Mode
Select Store / Home Mode.
Press ENTER.
Store / Home Mode
To use this TV for display in a store showroom, please select [ Store ].
[ Home ] mode is recommended for normal use.
Home
Navigating the menu system
• When a menu is opened, use the arrow buttons (
Picture
Picture
on the remote control, to move in the corresponding
Picture Mode
Standard
direction in the menu.
Sound
Reset
Backlight
100
• Press ENTER to save your menu settings or select a
Options
Contrast
100
Brightness
0
highlighted item. (A highlighted menu item appears in a
Installation
Color
0
different color in the menu.)
Tint
0
Timers
Sharpness
0
• All menus close automatically if you do not make a
Advanced Picture Setting
selection within 60 seconds.
Get Help
Display Setting
• To close a menu instantly, press EXIT.
You can use the buttons on the remote control
to access and navigate your TV's onscreen
menu system.
• Press MENU to open the menu system.
Quick Tour
Back
4. Component Video Input
®
ColorStream
HD Component may also be used to
receive HDTV. Use if no HDMI
TM
or DVI jack is
available. There are three jacks color-coded with
red-green-blue on the back of the TV and HD
cable box or HD Satellite receiver. This connection
will require a separate analog audio connection
(use the red and white audio connections).
OUTPUT
INPUT
Cable box/Satellite box
TV
Left side
4. ANT/CABLE in
Select Antenna or Cable.
Press ENTER.
ANT / CABLE in
Antenna
Need Help?
)
Consult the electronic User's Guide
To access the electronic User's Guide please visit
support.toshiba.com. Click on Product Support, search for
your model, and then click User's Guide or Manuals & Specs.
For solutions to the most common problems, refer to the
Troubleshooting section of the User's Guide.
Visit Toshiba's Support Web site
support.toshiba.ca/web/support.grp
Back
32/39/50 L 2300 UC S eries
23 L 2300 UC S eries
Left side
32/39/50 L 2300 UC S eries
Power button
Channel / Volume increase/decrease
Switches the function of the
VOL +/- buttons to select the
CH/INPUT
volume, channel, or input mode.
For more information about the CH/INPUT button,
refer to the User's Guide.
HDMI
TM
port
USB port
Most problems are easy to correct. Save time with one of these simple
solutions.
Call Toshiba Customer Support Center
If you are experiencing a technical problem or have questions
regarding operation, authorized service centers, warranty or
parts, Toshiba Customer Support Center is ready to help
1-800-268-3404 From within Canada
Colorstream is a registered trademark of Toshiba America Information Systems, Inc. and/or Toshiba Corporation.
HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of
HDMI Licensing, LLC.
All other brand and product names are trademarks or registered trademarks of their respective companies.
Printed on recycled paper
©2012
Toshiba of Canada Limited.
23 L 2300 UC S eries
TM
HDMI
port
USB port
• HF6RI23011I • 12/12
Advertisement
