Toshiba B-852-TS22-QQ-R Owner's Manual page 39

2. PRINTER SETUP
2.9.1 Parameter Setting
(Cont.)
(20) Label End/Ribbon End Selection
This parameter is to choose a printing process when a label end or ribbon
end is detected.
When "<2>PARAMETER SET" appears, press the [PAUSE] key until
the following display appears.
LBL/RBN END TYP1
Use the [FEED] or [RESTART] key to select a desired option.
[RESTART]
[FEED]
After selecting a Label End type, press the [PAUSE] key.
(21) Maxi Code Specification Selection
This parameter is to choose a Maxi code specification.
When "<2>PARAMETER SET" appears, press the [PAUSE] key until
the following display appears.
MAXI CODE TYPE1
Use the [FEED] or [RESTART] key to select a desired option.
[RESTART]
[FEED]
After selecting a Maxi code specification, press the [PAUSE] key.
E2-26
ENGLISH VERSION EO1-33055
2.9 Setting an Operating Environment
LBL/RBN END TYP1
TYPE1: When a label/ribbon end is
detected in the middle of printing,
printing is immediately paused.
LBL/RBN END TYP2
TYPE2: When a label/ribbon end is detected
in the middle of printing, the printer prints the
half-finished label as far as possible, and
stops when the next label is at the home
position.
MAXI CODE TYPE1
TYPE1: Compatible specification
with the B-X series
MAXI CODE TYPE2
TYPE2: Specification for specific
home delivery company