Set System Date; Setting The System Clock; Setting The Keypad Brightness - GE NX-1348E-ICON User Manual

Set system date

Step 1 Press [r]-[9]-[6]. Enter Code icon will display.
Step 2 Enter a ["Master Code"]. The service icon will appear flashing.
Step 3 Enter the "Day of Week "
1=Sunday 3=Tuesday
2=Monday 4=Wednesday
Step 4 Enter the "Month Code". Must always be two (2) digits.
01 = January
02 = February
03 = March
04 = April
Step 5 Enter the "Day Code". Must always be two (2) digits.
th
Example: The 5 would be entered as [0]–[5].
Step 6 Enter the last two digits of the "Year Code".
Example: For 1997 enter [9]–[7].
The ready icon will appear.

Setting the system clock

Step 1 Press [r]-[9]-[7]. Enter Code icon will appear.
Step 2 Enter a ["Master Code"]. Then the service icon will begin to flash.
Step 3 Enter the "hour code" which must be two (2) digits. Note: The clock is a 24-hour clock. Refer to the
following table.
Step 4 Enter the "minutes code" which must be two (2) digits. Then the ready icon will come on constant.
Example: 7 minutes after would be entered [0]–[7].
12:00
Midnight
1:00 AM
2:00 AM
3:00 AM
4:00 AM
5:00 AM
6:00 AM
7:00 AM

Setting the keypad brightness

Step 1 Press [r]-[9]-[1].
Step 2 Press the [•] and [–] scroll keys to leden or darken the illumination behind the buttons and the ICON
display. It is usually easier to set this adjustment in a darkened room.
NX-1348E-ICON
5=Thursday 7=Saturday
6=Friday
05 = May 09 = September
06 = June 10 = October
07 = July 11 = November
08 = August 12 = December
00 8:00 AM
01 9:00 AM
02 10:00 AM
03 11:00 AM
12:00
04
Noon
05 1:00 PM
06 2:00 PM
07 3:00 PM
08 4:00 PM 16
09 5:00 PM 17
10 6:00 PM 18
11 7:00 PM 19
12 8:00 PM 20
13 9:00 PM 21
14 10:00 PM 22
15 11:00 PM 23
g
GE Interlogix
- 15 -